Automotive and Shop Tape
Tape is one of the most used supplies in a body shop and a handy fix in any repair bay. This category holds masking tape and paper tape for paint prep, fine line and contour tapes for crisp paint edges and graphics, double sided acrylic attachment tape for moldings, emblems and trim, foam masking tape for door jambs and openings, vinyl electrical tape for wiring repairs and reflective tape for vehicles and equipment. Collision repair shops, painters, detailers, installers, fleet shops and DIY users rely on it.
Choosing the right tape
Masking tape holds paper and plastic in place during priming and painting, and automotive grades are made to release cleanly after baking. Fine line tape is thin and flexible, so it follows curves and leaves a sharp paint edge for two tone work and stripes. Foam tape masks door, hood and trunk gaps with a soft edge that blends the paint line. Attachment tape is a double sided acrylic foam tape that bonds trim, emblems and moldings to the body. Electrical tape insulates and bundles wiring, and reflective tape adds visibility to trailers, bumpers and equipment.
Sizes and selection
Tapes are sold by width and roll length, and the product names here list both, for example 1/2 in. by 10 yd. Narrow widths suit tight curves and edges, while wider rolls cover large areas faster. Match the tape to the paint system and bake cycle you use.
Using them
Apply tape to clean, dry, dust free surfaces and press the edge down firmly so paint cannot creep under it. Pull masking tape back over itself at a low angle once the paint has set. For attachment tape, clean the surface, use an adhesion promoter where the maker calls for one, and press the part firmly in place.
Brands we carry here include 3M, American Brand Tape, JTAPE, Tesa, Norton and SEM.




















































Follow us on social media