Sanding Discs and Sheets for Body Repair and Paint Prep
Sanding discs and sheets do the cutting in auto body work, from stripping paint and rust to shaping filler and preparing a surface for primer and paint. This category holds discs for dual action and orbital sanders, small discs for mini sanders and grinders, and sheets for sanding blocks and hand sanding, in grits from coarse to fine. Collision repair and refinish shops, restoration builders, fabricators and DIY painters use them.
Grit and sequence
Lower grit numbers are coarse and remove material fast; higher numbers are finer and leave a smoother surface. Body work usually runs in steps: a coarse grit to strip paint or level filler, a medium grit to shape and remove the coarse scratches, and fine grits to prepare for primer and paint. Skipping too many grits at once can leave scratches that show through the finish.
Choosing a disc
Match the disc diameter and attachment to the sander pad, for example 6 in. grip discs on a 6 in. hook face pad. Discs come with or without dust extraction holes; a hole pattern that lines up with the pad lets a dust extraction sander pull dust through the disc. Abrasive types include ceramic, which suits aggressive cutting on metal and filler, and film-backed discs, which give an even scratch pattern in finer grits.
Using them
Let the abrasive do the work with light, even pressure, change discs once they stop cutting, and keep sanding dust away from fresh paint. Backing pads, interface pads and sanding blocks are in the neighboring Pads and Sanding Blocks sections of Paint and Body.
Sheets suit sanding blocks and hand work on edges, curves and body lines where a disc on a sander cannot follow the shape of the panel.
Brands we carry include 3M, Norton, Sunmight, Mirka, High Teck and Indasa.


.gif)






































.jpeg)








Follow us on social media