Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Cutting and Threading > Extractors - Stud Removers > STUD REMOVER - 12


12mm Stud Remover  6987-12

Stud Remover - These metric and SAE, 4-piece, stud remover sets offer the best professional extractors available. Designed and tested to reach studs in difficult work areas. Housed in a blow-molded storage case. No. 6986-12 - STUD REMOVER - 12 MM

OTC Tools  6987-12 12mm Stud Remover 
  • Manufactured by: OTC Tools and Equipment
  • Toolsource #: 131979
  • Manufacturers Part #: 6987-12
  • Also Known As: OT6987-12, OTC-6987-12

Only 1 left in stock - order soon


Related Products

  • 3/8 Inch Drive Impact Stud Extractor 1/4 - 1/2 Inch
    3/8 Inch Drive Impact Stud Extractor 1/4 - 1/2 Inch
    Manufacturers Part #: 29895
    Your Price: $62.24
    The Mayhew 29895 Stud Extractor is used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Made out of high-grade, heat-treated alloy steel. Chrome finish for additional rust protection and aesthetic appeal. Use with a 3/8-Inch impact wrench, on low. Made in Taiwan to Mayhew's specifications. Comes with a 2-year limited warranty. Mayhew stands for quality, dependability, and confidence....
  • 3/8 In Dr German Stud Extractor
    3/8 In Dr German Stud Extractor
    Manufacturers Part #: 0181-1
    Your Price: $138.19Includes Free Shipping
    Universal tool for studs with diameter 6 - 12 mm. Suitable even for broken screws when the rest length is at least 5mm. Advantages: Infinitely adjustable.Operates in the most confined space.Ideal also for bolts with rusted or stripped threads.Also for bolts with undersize. Klann Tools KL-0181-1 3/8" Drive Stud Extractor ...
  • 3-7/8" Screw Extractor
    3-7/8" Screw Extractor
    Manufacturers Part #: J9525B
    Your Price: $12.91
    J9525B - 3-7/8" Screw Extractor Features and Benefits Drive into end of broken pipe or fitting Use tap holder or wrench on extractor to turn out broken part Size stamped on extractor refers to drill bit size to be used with that extractor Product Details Length 3-7/8" Weight 0.18 lbs Diagonal Measurement 27/64" Min. 11/16" Specifications Fed'l Specs.: GGG-W-936C U.S.S. 3/4" Warranty Use saf...
  • 3/4" Stud Remover
    3/4" Stud Remover
    Manufacturers Part #: 2517
    Your Price: $25.37
    With this tool, you are able to remove broken/stripped inner cap nuts and spoke wheel studs When hammered on, the self tapping spines cut grooves down on the stud, allowing for easy removal Remove 5/8" Broken Wheel Studs Manufacturer's SKU 2517 Brand Grey Pneumatic Safety Info Always wear safety goggles when using Impact Tools Use only properly matched fractional or metric sizes Hammer on rib nut only when it is inside the drive-on too...
  • 3/4" Stud Setters For Installing Spoke Wheel Studs
    3/4" Stud Setters For Installing Spoke Wheel Studs
    Manufacturers Part #: 2617
    Your Price: $21.75
    Grey Pneumatic Impact Sockets are designed for professional tool users. They are engineered specifically for use with impact tools, using the most up to date industrial specifications. Grey Pneumatic Impact Sockets are made from high quality alloy steel (chrome-molybdenum). Thorough and exact heat treatment insures the correct balance of strength and durability. Grey Pneumatic Impact Sockets are tested to the highest specifications to deliver o...

Customers Also Purchased:

Customers Also Shopped For:

  • 3/8 In Dr Impact Socket, 6 Pt, Deep, 9/16 In
    3/8 In Dr Impact Socket, 6 Pt, Deep, 9/16 In
    Manufacturers Part #: 318D
    Your Price: $3.33
    3/8" Drive Impact Socket, 6 Point, Deep, Size 9/16" Forged from the finest Molybdenum alloy steel - the best choice for strength and durability. Designed to extend the life of fasteners. Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener. Lifetime Warranty -- full replacement. ...
  • 1/2 In Drive 12 Pt Deep Fractional Socket - 1-3/16 In
    1/2 In Drive 12 Pt Deep Fractional Socket - 1-3/16 In
    Manufacturers Part #: 40838
    Made in the U.S.A., featuring quality workmanship and value. The patented SureGrip(R) hex design drives the side of the fastener, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. High polish SuperKrome(R) plating results in a jewelry-like finish, providing long life and maximum corrosion resistance. Specifications: H...
  • Cut-Off Wheels - 5 Pack
    Cut-Off Wheels - 5 Pack
    Manufacturers Part #: 94860
    Your Price: $7.36
    Abrasive reinforced wheels are ideal for automotive and autobody repair. Cut all ferrous materials with ease. Cut through clamps, hangers, sheet metal, angle iron, tubing, castings, mufflers and rusted bolts. Leaves a clean edge. Easier and safer to control than a torch, faster and less effort than a hacksaw. Wheels comply with American National Standards Institute Code B7.1 (1968 Rev.) and OSHA. Rated at 25,000 RPM maximum speed. P...
  • Swivel Handle Oil Filter Wrench 2-7/8 - 3-1/4 In
    Swivel Handle Oil Filter Wrench 2-7/8 - 3-1/4 In
    Manufacturers Part #: 73601
    Your Price: $8.13
    Swivel Handle Oil Filter Wrench Range: 2-7/8" - 3-1/4"Swivel heat treated handle for easy access.Designed to remove oil filters in hard to reach areas.Featuring a unique yolk and link assembly for a positive grip on the oil filter....
  • 12MM Stubby Gearwrench
    12MM Stubby Gearwrench
    Manufacturers Part #: 9512
    Your Price: $11.38
    Speed and Access in confined areas. Completes the job quicker than traditional stubby wrenches. Great when working in confined areas.Features short pattern and 0? offset for extremely confined areas.5? precision movement promotes fast-ratcheting action to get the job done in less time than traditional stubby wrenches.All steel construction (including gear) - IMPORTED.Maximum Torque Design - patented open end design provides up to 25% more torque ...
  • Universal 1/2 In Dr Stud Extractor
    Universal 1/2 In Dr Stud Extractor
    Manufacturers Part #: 0181-3
    Your Price: $134.39Includes Free Shipping
    Impact tool safe!Fits studs 6-12mm.Infinitely adjustable.Ideal for bolts with rusted or stripped threads.Hex Drive can be driven with wrench or impact tool. Klann Tools KL-0181-3 Universal 1/2 In Dr Stud Extractor ...

Current Reviews: 0