Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Diesel & Truck Tools > Engine Service Tools > Gear Remover 2009 CTS

Gear Remover 2009 CTS-V

Gear Remover 2009 CTS-V
Applications: 2009 CTS-V
  • Gear ratio changes between T56 and TR6060 have caused gear diameters to increase.
  • J-39431-A removes these larger gears on TR6060 manual transmissions.
  • J-39431-A is placed around the gear to be removed, and attached to J-8433 Puller using the supplied threaded rods and hardware.
  • J-8433 and the supplied nuts of J-39431-A are tightened against the output shaft to draw the gear off the shaft.
  • Unapproved methods will damage transmission components.
Kent-Moore Tools J-39431-A Gear Remover
  • Shipping Weight: 3lbs
  • Manufactured by: Kent-Moore
  • Toolsource #: 132886
  • Manufacturers Part #: J-39431-A
  • Also Known As: KMJ39431A

Only 1 left in stock - order soon


Related Products

  • Two Jaw Puller - A/C, TRANS, ST
    Two Jaw Puller - A/C, TRANS, ST
    Manufacturers Part #: J-8433
    Your Price: $278.56Includes Free Shipping
    Applications: A/C, TRANS, ST1999-1/2 & Later T-Series & W5 with Isuzu MLD6Q 6-Speed manual transmission.The countershaft rear bearing requires a great deal of force over a large span to remove, and must be removed before the countershaft can be taken out of the transmission case.J-8433 is used with previously essential J-22912-01 Bearing Remover to remove the countershaft rear bearing.J-22912-01 is placed around the countershaft rear bearing, wi...
  • Balancer and Timing Sprocket Installer GM CTS-V, Corvette ZR1
    Balancer and Timing Sprocket Installer GM CTS-V, Corvette ZR1
    Manufacturers Part #: J-41665-A
    Your Price: $100.54Includes Free Shipping
    Superceded Tool Number: J-41665 GM Reference Number: EN-41665-A Applications: CTS-V, Corvette ZR1 2009 supercharged 6.2L V8 engines use a keyway to locate the balancer, and the timing sprocket and balancer must be installed over this keyway.J-41665-A is slotted to fit over this keyway, and is used with the forcing screw and hardware from either J-41478 Front Seal Installer or EN-47812 Front Seal Installer Bolt to seat the lower timing gear sproc...

Customers Also Shopped For:

Current Reviews: 0