Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Drive Train- Transmission > Drive Shaft & U Joint > Slack Adjuster Puller - Hald

Slack Adjuster Puller - Haldex

Slack Adjuster Puller - Haldex
New and improved design accommodates the removal of virtually all Haldex self-adjusting slack adjusters including, left offset, right offset, and standard elongated arm designs from either side!

Features:
  • High strength ADI and steel castings.
  • CNC machined, billet 4140 forcing screws.
  • Grade 8 attaching hardware.
  • Eliminates dangerous hammering and cutting torch methods.
  • Designed for high capacity pull. Can be used with a 1/2" impact wrench.
  • Simple to slip on for instant results.
MSRP: $337.84

Tiger Tool 10410 Slack Adjuster Puller
  • Shipping Weight: 7lbs
  • Manufactured by: Tiger Tool
  • Toolsource #: 92336
  • Manufacturers Part #: 10410
  • Also Known As: TG10410

Only 1 left in stock - order soon

$288.50

Related Products

  • Heavy Duty U-Joint Puller
    Heavy Duty U-Joint Puller
    Manufacturers Part #: 10102
    Note: This item is normally available for same day shipment if order is received prior to 2 PM Eastern Time. However, this item is not eligible for Next Day or 2nd Day Air shipping at banded shipping rates. Please contact us for expedited shipping quotation. The World's greatest U-Joint Puller! Engineered for use with up to a one-inch impact wrench, this tool provides the ultimate "brute strength" for disassembling drivelines. Fits Spicer drivel...
  • Heavy Duty Yoke Puller Kit
    Heavy Duty Yoke Puller Kit
    Manufacturers Part #: 10803
    The Tiger Yoke Puller simplifies and expedites the removal of heavy-duty yokes on driveshafts, transmissions and rear-end differentials without damage to yokes or other components. Enginereed for use with a 1/2" imact wrench. Fits full and half round yokes on Spicer and Meritor 1610, 1710, 1760, 1810 series, Spicer SPL 140, 170, 250 series and Meritor (Rockwell) RPL 20 and 25 series. Features: CNC machined from billet chrome-moly steel.Heat treat...
  • Slack Adjuster Puller - Rockwell
    Slack Adjuster Puller - Rockwell
    Manufacturers Part #: 10407
    Fits virtually all Rockwell self-adjusting slack adjusters. Features: High strength ADI and steel castings.CNC machined, billet 4140 forcing screws.Grade 8 attaching hardware.Eliminates dangerous hammering and cutting torch methods.Designed for high capacity pull. Can be used with a 1/2" impact wrench.Simple to slip on for instant results. Tiger Tool 10407 Slack Adjuster Puller ...
  • Brake Clevis Pin Press
    Brake Clevis Pin Press
    Manufacturers Part #: 10501
    Your Price: $141.80Includes Free Shipping
    Works on all makes & models of truck and trailer slack adjuster brake clevises.Quickly & easily shears the cotter pin to allow removal of the clevis pin. Tiger Tool 10501 Brake Clevis Pin Press ...
  • Automotive U-Joint Service Kit
    Automotive U-Joint Service Kit
    Manufacturers Part #: 20503
    Package comes complete with a universal joint puller, bearing cup installer and hotchkiss snap ring pliers to fit cars, light to intermediate sized trucks, and various farm machinery, etc. Includes: 10105 Universal Joint Puller 10202 Bearing Cup Installer 70300 Hotchkiss Snap Ring Pliers 29503 Custom High Density Foam-Filled Case Tiger Tool 20503 Automotive U-Joint Service Kit ...
  • disc. U-Joint Snap Ring Pliers
    disc. U-Joint Snap Ring Pliers
    Manufacturers Part #: 70300
    Your Price: $21.56
    Unique jaw design allows the technician to easily remove Hotchkiss style snap rings with one hand.Quickly & easily remove trim clips on domestic and import cars.Excellent for inner fender liner clips.Removes body molding trim clips without breaking them. Tiger Tool 70300 U-Joint Snap Ring Pliers ...
  • Automotive Yoke Puller
    Automotive Yoke Puller
    Manufacturers Part #: 10850
    The Tiger Automotive Yoke Puller simplifies and expedites the removal of automotive yokes on drive shafts, transmissions and rear-end differentials without damage to the yokes.Designed to expedite the removal of automotive yokes without damage to differentials or other components. Tiger Tool 10850 Automotive Yoke Puller ...

Customers Also Purchased:

  • Brake Clevis Pin Press
    Brake Clevis Pin Press
    Manufacturers Part #: 10501
    Your Price: $141.80Includes Free Shipping
    Works on all makes & models of truck and trailer slack adjuster brake clevises.Quickly & easily shears the cotter pin to allow removal of the clevis pin. Tiger Tool 10501 Brake Clevis Pin Press ...
  • Manual Slack Adjuster Puller
    Manual Slack Adjuster Puller
    Manufacturers Part #: 10406
    Your Price: $235.69Includes Free Shipping
    Manual Slack Adjuster Puller   10406 Fits virtually all makes and models of manual type slack adjusters. High strength ADI and steel castings. CNC machined, billet 4140 forcing screws. Grade 8 attaching hardware. Eliminates dangerous hammering and cutting torch methods. Designed for high capacity pull. Can be used with a 1/2" impact wrench. Simple to slip on for instant results. Shipping Weight 5 lbs Tiger Tools 10406 Manual Slack...

Customers Also Shopped For:

  • Crankshaft and Camshaft Seal Tool Kit
    Crankshaft and Camshaft Seal Tool Kit
    Manufacturers Part #: 70960
    Your Price: $132.27Includes Free Shipping
    Remove and install crankshaft and camshaft seals on most all passenger cars, SUV and light commercial vehicles. Easily remove and install crankshaft and camshaft seals without damage Compact puller with unique extracting hooks engage seal for quick removal Interchangeable sleeves and mandrels allow easy installation of new seal Suits seal sizes 21.5mm - 64mm Reduces service times and ensures no reworks due to damaged seals or housings PBT USA 7...
  • HSS Drill Bit 3/8 In Shank, 15/32 In Diameter
    HSS Drill Bit 3/8 In Shank, 15/32 In Diameter
    Manufacturers Part #: 10486
    Your Price: $8.47
    HSS Drill Bit 3/8" Shank, 15/32" Diameter Overall length 5-3/4". Flute length 4-5/16". Reduced shank allows for drilling larger holes with 3/8" drills. 118 degree split point prevents drill walking. Ideal for steel, wood and plastic. ...
  • Pull Rod Set
    Pull Rod Set
    Manufacturers Part #: 20000
    Your Price: $32.78
    "The Original" Super tough alloy steel is precisely heat-treated for maximum strength.Factory tested under a 500 pound (228 kg) load.Vinyl coated handle is comfortable to use.Use two at a time for pulling. Set Includes: 4 Pull Rods 2 Pick Pulls1 Stainless Steel Straight Edge1 HS Split Point Drill Bit1 Instruction Sheet Steck 20000 Pull Rod Set ...
  • Blue Charging Hose - 36In
    Blue Charging Hose - 36In
    Manufacturers Part #: 32036
    Your Price: $17.93
    Robinair Premium Refrigerant Charging Hoses are built for long life and dependability.A strong, six-sided crimp provides a reliable connection between the hose and barb, even at maximum pressure.The coupler nuts are deeply knurled for quick finger-tightening.1/4" standard hose with standard fittings.Neoprene-coated for felxibility and wear resitance. With a valve core depressor and a 45 degree bend on one end for convenient access to the system....
  • Bearing Locknut Socket - 2 1/4 In - 6 Pt
    Bearing Locknut Socket - 2 1/4 In - 6 Pt
    Manufacturers Part #: 1920
    Your Price: $21.45
    Features: Truck wheel bearing locknut socket has 3/4" square drive opening.Permits the use of an extension & torque wrench to tighten the locknut as required.Locknut removal & installation is simple, even when wide rim wheels are involved.A long extension may be attached to the socket to provide the necessary clearance.Socket is made of high-strength steel.Opening resists "rounding out." OTC 1920 2-1/4" 6-Pt Bearing Locknut Socket ...
  • Dolly General Purpose
    Dolly General Purpose
    Manufacturers Part #: 1060
    Your Price: $42.16
    Provides convenient and comfortable hand hold during heaviest blows. Weight, balance and several differently crowned working faces, together with two beading and flange lips, give this dolly broad general use. Sizes 2-7/8" x 2-3/8" x 2-3/16"Weight 3 lbs. Martin Sprocket & Gear 1060 General Purpose Dolly ...

Current Reviews: 0