Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Electrical Systems > Circuit Testers > Relay Buddy Automotive Relay Test

Relay Buddy Automotive Relay Tester

Relay Buddy Automotive Relay Tester
Relay Buddy is a quick go / no-go tester for the most common automotive relays. It provides you with an indication of the general health and functioning of the relay switch contacts and coil. Relay Buddy will check the control side of the relay by applying a signal to the relay coil while it checks for proper functioning of the relay contacts. Relay Buddy operates the relay several times during each test session as it watches for consistency in every cycle. Relay Buddy will fail the relay and light the RED LED if any one of the cycles proves unsuccessful during the test session.
  • Tests 4/5 Pin Relays - 3 different relay types
  • Tester uses 12V battery from vehicle, cycles the relay 10 times
  • Relay Buddy will fail the relay if one of the cycles proves unsuccessful during the test
  • Automatic Test with Good/Bad Indication - switch contacts loaded to detect excessive resistance
  • Quick and easy "off the car" relay test
Electronic Specialties 190 Relay Buddy Automotive Relay Tester
  • Shipping Weight: 1lbs
  • Manufactured by: Electronic Specialties
  • Toolsource #: 130049
  • Manufacturers Part #: 190
  • Also Known As: EL190, ES190, ESI-190, ESI190

Only 5 left in stock - order soon

Inventory available from other suppliers, prices may be different


Frequently bought together:

Customers Also Purchased:

  • Relay Circuit Diagnostic Tester Tool 12 or 24 Volt
    Relay Circuit Diagnostic Tester Tool 12 or 24 Volt
    Manufacturers Part #: 76
    Your Price: $109.44Includes Free Shipping
    Featured on PTEN Magazine's 2012 Top 100 Most Wanted Products List Works on 12 or 24 volt systems.Used to test relay circuits in late model vehicles.Identify the problem in a circuit in seconds without the use of a multi-meter.Can jump the relay for compression testing a/c recharge etc.Includes six (6) of the most popular relay adapters plus a universal to configure your own.Cuts diagnostic time on relay related problems by up to 75%.Includes in...
  • Flat Band Hose Clamp Pliers
    Flat Band Hose Clamp Pliers
    Manufacturers Part #: 17100
    Your Price: $20.75
    Features: Adjustable jaws fit all clamp sizes for easy removal & installation.This tool removes & installs flat band hose clamps used on heater & radiator hoses.Tips screw in & out to fit all clamp sizes.Ratcheting lock mechanism holds the clamp in an open position for easy removal & installation.Tips can be switched to accommodate different applications.Offset jaws allow access in hard to reach areas.Skin packed.Shipping weight 15 oz. Lisle 171...
  • Air Bag Release Tool for GM Vehicles
    Air Bag Release Tool for GM Vehicles
    Manufacturers Part #: 55150
    Your Price: $15.83
    This tool is used to make the release of the SIR module retention springs an easy job! It's used on GM cars, Minivans and light trucks. Also it’s designed to resist bending on truck retention springs. Don't stress out; when you have this simple tool available! Features: Tips are tapered to make removal easier Heat-treated alloy steel, unlike competitors versions Easily removes SIR module Fair priced, inexpensive Fits most GM cars, minivans,...
  • AirCat 6255 1/4 In Dr Angle Die Grinder - 90? Angle Head
    AirCat 6255 1/4 In Dr Angle Die Grinder - 90? Angle Head
    Manufacturers Part #: 6255
    Great Tool to get in the tight spots! All the Power, Half the Noise! The AIRCAT tool line has a substantially reduced level of noise while retaining more power and torque. Our tools have been tested & shown to operate at 82-86 dBa (decibels), far below the OSHA guidelines. This feature benefits not only the mechanic but also the overall business. The patented tuned exhaust muffler technology, in all the tools, allows discharged air to pass witho...
  • Fuel Line Disconnect Tools
    Fuel Line Disconnect Tools
    Manufacturers Part #: 230TNZ
    Your Price: $14.07
    These fuel line service tools were designed to remove stubborn fuel lines from today's cars & trucks. Made of aircraft grade aluminum. This makes them very light and strong. Opening is 3/4" and tapers down to 1/8". This allows a universal application with just two tools. Low profile design provides access into the smallest places with the most force available to remove the worst nightmares! Patent Pending  Cal-van Tools 230TNZ Fuel ...

Customers Also Shopped For:

Current Reviews: 0