Brake Cylinder Flex-Hone - 2-3/8 x 8" - 180 Grit - Brush Research

2-3/8" x 8" Brake Cylinder Flex-Hone - 180 Grit

Key Features:

• Silicon carbide abrasive type.
• A resilient, flexible honing tool with a soft cutting action.
• The abrasive globules each have independent suspension that assures the Flex-Hone(R) to be self-centering, self-aligning to the bore, and self-compensating for wear.

Applications:

• Used for honing brake cylinders.

Benefits:

• Provides a smooth, even finish on the brake cylinder bore.
• Helps to extend the life of the brake cylinder.
• Makes the brake cylinder easier to operate.

How to Use:

1. Inspect the brake cylinder bore for any damage.
2. Apply a light coat of honing oil to the brake cylinder bore.
3. Insert the Flex-Hone(R) into the brake cylinder bore and turn it clockwise until it is fully seated.
4. Hone the brake cylinder bore for 10-15 strokes.
5. Remove the Flex-Hone(R) from the brake cylinder bore and wipe it clean.
6. Inspect the brake cylinder bore for any damage.
7. Apply a light coat of brake fluid to the brake cylinder bore.

Warnings:

• Do not use the Flex-Hone(R) on a brake cylinder that is damaged.
• Do not use the Flex-Hone(R) on a brake cylinder that is leaking.
• Do not use the Flex-Hone(R) on a brake cylinder that is hot.
• Do not use the Flex-Hone(R) on a brake cylinder that is under pressure.

Cautions:

• Use caution when using the Flex-Hone(R).
• Wear gloves when using the Flex-Hone(R).
• Keep the Flex-Hone(R) out of reach of children.