Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Battery Diagnostics & Charging > Booster Packs > Start All with Air Compressor 12 V 700 A 23 C

Start All with Air Compressor 12 V 700 A 23 CFM

Start All with Air Compressor 12 V 700 A 23 CFM
Non-stock item, back order status; please email service@toolsource.com for lead time.
Output
12 volt, 700 amp, 23 CFM @ 100 psi, 150 psi max
Dimensions
30"W x 40.5"D x 21"H, 475 lbs.
Engine
Electric start, air cooled Kohler OHV V-twin gasoline engine. Fuel tank required, sold separately.
Cables & Clamps
30 ft., 1/0 ga. welding cable allows flexibility and ease of use, 1000 amp full-power clamps allow higher amperage flow
General Features
  • Electric start, air cooled Kohler OHV V-twin gasoline engine. Fuel tank required, sold separately.
  • Single stage air compressor, 23 CFM @ 100 psi, 150 psi max. Air tank required, sold separately.
  • 30 ft., 1/0 ga. welding cable allows flexibility and ease of use
  • 1000 amp full-power clamps allow higher amperage flow
  • Volt and amp meter to monitor boosting output
  • Voltage Control provides regulated voltage that is safe for vehicles and on-board electronics
  • Reverse Current Shutdown Protection eliminates expensive repairs to the Start•All® if the unit runs out of gas
  • Reverse Polarity Protection will not allow the Start•All® to be turned on if the cables are not hooked up correctly
  • Polarity and low battery LED indicators confirm proper connections
  • Antizap surge protection provides safer boosting
  • Single DC boosting switch for easy operation

All 11-900 series installations must be approved by the factory prior to ordering to assure proper air flow, dissipation and weather resistance.

The 11-900 series Start•All® units are designed to mount between the side packs on a service vehicle

The Control Panel is located on the curb side of the service vehicle for convenience and safety. 7"W x 19.75"H

Panel includes:
  • Oil pressure gauge
  • Air pressure gauge
  • Hour meter
  • Voltmeter
  • Ammeter
  • DC boosting switch
  • Air compressor switch
  • Remote oil filter
  • Engine oil drain hose
Manufacturer drop ship; please email service@toolsource.com for lead time.

$85 standard freight fee. Applies to direct shipping points within the 48 continental US states. Rural Area Surcharge may apply.
  • *An additional $40.00 will apply to all residential deliveries of heavy-equipment.
  • *For lift-gate service, add $135.00.
Goodall 11-922 Start-All® with Air Compressor
  • Shipping Weight: 475lbs
  • Manufactured by: Goodall Manufacturing
  • Toolsource #: 179607
  • Manufacturers Part #: 11-922
  • Also Known As: GO11-922

Special Order
Contact For Details

Add to cart for details:

Related Products

  • Start-All, 700 Amp, 12/24 Volt Gas Powered Automotive and Truck
    Start-All, 700 Amp, 12/24 Volt Gas Powered Automotive and Truck
    Manufacturers Part #: 11-620
    Your Price: $9,686.88
    Please call us at 888-220-8350 or email us at service@toolsource.com to request a quote for this or any Goodall productThe 11-620 has the output necessary for starting heavy- duty vehicles and equipment. Performance you can rely on--start after start, year after year--and power that will crank engines in cold weather climates vehicle after vehicle. Powerful 12/24 volt jump starting in a compact size. Dimensions--28"W x 23"D x 26"HShipping Weight...
  • 700 Amp 12/24 Volt Start-All w/ 23 CFM Air Compressor Automotive
    700 Amp 12/24 Volt Start-All w/ 23 CFM Air Compressor Automotive
    Manufacturers Part #: 11-923
    Your Price: $12,231.29
    Manufacturer drop ship; please email service@toolsource.com for lead time. The 11-923 GoodAll Start-All is specifically designed for mounting in the load space between the side packs on a service truck body, with the control panel mounted on the curb side of the vehicle. This 2-in-1 unit provides 23 CFM of air to run air tools and tire service, and both 12-volt and 24-volt jump start service for cars up through off-road, transit, and military eq...
  • Start-All with Air Compressor 12/24 V 700/400 A 23 CFM
    Start-All with Air Compressor 12/24 V 700/400 A 23 CFM
    Manufacturers Part #: 11-921
    Your Price: $9,938.05
    Non-stock item, back order status; please email service@toolsource.com for lead time. Output 12/24 volt, 700/400 amp, 23 CFM @ 100 psi, 150 psi max Dimensions 31"W x 41"D x 21"H, 500 lbs. Engine Electric start, air cooled Kohler OHV V-twin gasoline engine. Fuel tank required, sold separately. Cables & Clamps 30 ft., 1/0 ga. welding cable allows flexibility and ease of use, 1000 amp full-power clamps allow higher amperage flow General Feature...

Customers Also Shopped For:

  • Vibration Damper Counter Holder - Mercedes Benz
    Vibration Damper Counter Holder - Mercedes Benz
    Manufacturers Part #: 112-0040
    Your Price: $136.95Includes Free Shipping
    Models: M112, M113, M137 Holds vibration damper when loosening and tightening center bolt.Handle can be extended with commercially available pipe, e.g. 3/4 din 2441, diameter 26.9 x 3.25 mm, length 1000mm. All returns on Baum Tools products have a 20% restock fee. Baum Tools 112-0040 Vibration Damper Counter Holder - Mercedes Benz ...
  • 700 Amp 12/24 Volt Start-All w/ 23 CFM Air Compressor Automotive
    700 Amp 12/24 Volt Start-All w/ 23 CFM Air Compressor Automotive
    Manufacturers Part #: 11-923
    Your Price: $12,231.29
    Manufacturer drop ship; please email service@toolsource.com for lead time. The 11-923 GoodAll Start-All is specifically designed for mounting in the load space between the side packs on a service truck body, with the control panel mounted on the curb side of the vehicle. This 2-in-1 unit provides 23 CFM of air to run air tools and tire service, and both 12-volt and 24-volt jump start service for cars up through off-road, transit, and military eq...
  • Chain Press Tool Kit
    Chain Press Tool Kit
    Manufacturers Part #: 925
    Your Price: $84.42
    Chain Press Tool Kit 925 Used on #520 - # 530 chain with press fit connecting links either standard or o-ring style. Since about 1990, most new chains use press-fit type side plates on the connecting links. With this type of link the side plate cannot be installed properly without the aid of this special tool. The chain manufacturers have determined a press fit adds strength to the connecting link and should always be used. JIMS USA JIM 925 ...
  • Hub Net Wrench 36mm
    Hub Net Wrench 36mm
    Manufacturers Part #: J-34826
    Your Price: $77.18
    Hub Net Wrench 36mm J-34826 Tool Number: J-34826 Tool Name: HUB NUT WRENCH 36 mm Kent-Moore KM J-34826 Hub Net Wrench 36mm ...
  • Semi-Automated Battery/Alternator/Starter Tester
    Semi-Automated Battery/Alternator/Starter Tester
    Manufacturers Part #: 6030DV
    Your Price: $260.64Includes Free Shipping
    Semi-Automated Battery/Alternator/Starter Tester  6030DV Hand Held Load Testers Model 6030DV Semi-Automated Battery/Alternator/Starter Tester Full 125 Amp load tests 12 and 24 Volt batteries, alternators and starters on all types of vehicles. Durable and built for safety. Recessed digital meter helps protect this hand-held tester from damage and ensures more accurate and reliable outputs. Features heavy duty insulated safety clamps with 300 ...
  • Power Center 1150, 2 Stage
    Power Center 1150, 2 Stage
    Manufacturers Part #: 01-150
    Your Price: $9,973.74
    Welder, AC Generator and Air Compressor 25”W x 48”D x 46”H, 630 lbs The Goodall® Power Center 1150 has the same design, but more power than the 1100. Sporting a powerful 25 HP Kohler Engine, 250 amp DC stick welder and a 29 cfm 2 stage compressor, this unit is perfect for ag, construction, municipal or repair applications. Easy bolt down installation. Engine Electric start, auto idle, air cooled Kohler command OHV V-Twin 8 ...

Current Reviews: 0