GM REAR CAMBER CAM - Alemite

Features and Benefits:

• 10-16 BUICKLACROSSE
• CAM BOLT
• Rear Adjustment Range: ?2.0? Camber
• Installation time: .5 hr/side
• Required: 1 kit per wheel

The factory torque-to-yield bolts are made to be used just once and discarded. Replace the factory's 10.9 Grade torque-to-yield bolts with SPC's upgraded 12.9 bolts and you will not need to replace the bolt for future alignments. Adjust rear camber ?2? now and in the future with these 'good for life' bolts. SPC uses a hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.