PRONTO Kombi Spot Putty - US Chemical & Plastics

The US Chemical & Plastics PRONTO Kombi Spot Putty (32046) is a professional-grade, single-component finishing putty engineered for efficiently correcting minor surface imperfections in automotive and industrial refinishing. This ready-to-use formula delivers an ultra-smooth consistency and rapid cure times, allowing professional technicians to maintain tight repair cycles without compromising finish quality.

Key Features

• Ready-to-Use 1K Formula: This single-component pronto kombi spot putty requires no mixing, enabling direct application from the tube for quick spot repairs and enhanced production efficiency.
• Rapid Drying & Easy Sanding: The putty becomes tack-free in approximately 45–90 seconds and is sandable in roughly 20 minutes at 72°F (22°C), significantly accelerating panel movement through the repair process. It sands easily to a featheredge, minimizing abrasive loading.
• Ultra-Smooth Application: Designed to spread cleanly and feather easily, this kombi spot putty effectively levels pinholes, sand scratches, and minor low spots, ensuring a smooth surface for subsequent coatings.
• Robust Multi-Substrate Adhesion: Ensures secure bonding to properly prepared bare steel, galvanized steel, aluminum, existing primers (1K & 2K), and aged OEM topcoats.
• High Solids, Low Shrinkage: With a 75.3% solids content, it provides reliable fill and holdout, reducing the potential for rework before primer and sealer application, and exhibiting minimal shrinkage.
• Low VOC Compliance: A VOC content of 3.31 lbs/gal (396 g/l) supports compliance with various shop environmental requirements, noted as having the lowest VOC of any Kombi.

Applications

Utilize PRONTO Kombi Spot Putty as a finishing putty after body filler application on a wide range of vehicles, including passenger cars, light trucks, SUVs, and commercial fleet panels. It is ideal for eliminating pinholes, fine sanding scratches, and minor surface waves before applying primer, sealer, basecoat, or single-stage topcoats on steel, aluminum, and galvanized substrates.

Specifications

• Manufacturer: US Chemical & Plastics (USC)
• Model Number: 32046
• Weight: 0.5 lb (5 oz)
• Dimensions: 5.9 x 2.25 x 1.45 in
• Color (as packaged): Olive drab
• VOC: 3.31 lbs/gal (396 g/l)
• Solids: 75.3%