Holding-Down Tool Set - Gedore

The hold-down kit facilitates the removal and installation of suspension springs on transverse and trailing arm axles. Recommended e.g. for removal and installation with the internal spring tensioner - KL-0033-10 E. The hold-down is inserted between the upper axle guide and the vehicle body and slightly pretensioned. This now holds the wheel suspension in its current position while the suspension spring is being tensioned, which reduces the required tensioning travel and makes the removal of the suspension spring much easier. Universal fit for transverse and wishbone axles.Especially suitable for rear axles on VW-Audi and Porsche. The hold-down kit facilitates the removal and installation of suspension springs on transverse and trailing arm axles by maintaining the distance between the upper axle control arm and the vehicle body (the suspension remains "sprung"). This creates more space for spring replacement. Code: 3275205 | Part No.: KL-0033-300 E | Clamping travel (1): 80 - 113 mm | Clamping travel (2): 105 - 138 mm | Ø (1): 40 mm | Ø (2): 50 mm | Drive: 22 mm | Storage: in Foam Insert | Width: 223 mm | Height: 41 mm | Depth: 140 mm | Weight: 790 g

Features and Benefits:

• Made in Germany
• High material protection
• High work safety
• High time saving