Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Battery Diagnostics & Charging > Battery Service Tools > Battery Brush - Plast

Battery Brush - Plastic

Battery Brush - Plastic
Features:
  • Remove corrosion and dirt from battery terminals and cable clamps.
  • High-impact, plastic case will not corrode or soften brush in cleaning solutions.
  • The external brush cleans cable clamps and the internal brush cleans terminal posts.


    • Shipping Weight: 0.25lbs
    • Manufactured by: GearWrench
    • Toolsource #: 71085
    • Manufacturers Part #: 201
    • Also Known As: KD201, KDT-201, KDT201

    Usually In Stock
    Usually ships in 24-48 hours
    Manufacturer Direct

    $5.39

    Customers Also Purchased:

    • Battery Terminal Spreader & Cleaner
      Battery Terminal Spreader & Cleaner
      Manufacturers Part #: 204
      Your Price: $17.20
      Clean and spread battery cable terminals with this pliers-type tool. It's simple to use. Simply squeeze the handle to spread the clamp. This is a handy tool to have in your box! Features: Sharp teeth effectively clean from the clampMade with no-slip grip handlesCaution: Wear eye protection KD Tools 204 Battery Terminal Spreader & Cleaner ...
    • Battery Terminal Puller
      Battery Terminal Puller
      Manufacturers Part #: 202
      Your Price: $15.00
      Features: Use puller to remove the battery terminal clamp without damaging the battery post.Puller will even work on corroded spring-type clamps.To use, loosen the clamp bolt, place jaws under each side of the battery cable clamp and tighten the center screw until the clamp is free. KD Tools 202 Battery Terminal Puller ...
    • Cooling System & Radiator Pressure Cap Tester
      Cooling System & Radiator Pressure Cap Tester
      Manufacturers Part #: 12270
      Your Price: $78.80
      The Stant 12270 tester allows you to test today`s cars higher pressure cooling systems and pressure caps up to 30 pounds.The gauge includes new cap testing pressure ranges of 17-19 lbs., 20 lbs., and 28-30 lbs.The larger color coded dial makes it easy to accurately test these higher pressure caps and systems.The 12270 head also includes a pressure release bar that, when turned clockwise, releases pressure buildup before removing the head from th...
    • Fuel & Transmission Line Disconnect Tool Kit - 12-Pc
      Fuel & Transmission Line Disconnect Tool Kit - 12-Pc
      Manufacturers Part #: 41500
      Your Price: $45.64
      Disconnect tools that separate fittings on fuel, filter, transmission, air conditioning systems, and fuel tank return lines on most vehicles, trucks, and other heavy equipment.Low profile anodized disconnects - provides greater versatility.Removable hinge style lid - allows for convenient storage in tool box drawers.Laminated bilingual instruction card integrated into case design - handy reference of application information.Individual part numbe...
    • Brake Lining Thickness Gauge
      Brake Lining Thickness Gauge
      Manufacturers Part #: 3962
      Your Price: $15.63
      Color coded brake gauge indentifies thickness levels for brake lining inspection All steel construction Metric Gauges - 8mm, 10mm and 12mm (Green), 4mm, 5mm and 6mm (Yellow), 2 and 3mm (Red) SAE Gauges - .3150 to .4720" (Green), .1575 to .2382" (Yellow), and .0787 to .1181" (Red) All gauges fastened together for ease of use KD Tools 3962 Brake Lining Thickness Gauge ...
    • Push Pin Pliers Kit - 2-Pc
      Push Pin Pliers Kit - 2-Pc
      Manufacturers Part #: 41840
      Your Price: $28.21
      Features 30 and 80 degree Push Pin Pliers in one convenient set.80 degree offset version - excellent for access around wheel wells.Original 30 degree offset quickly removes plastic anchors that have center pins without damage to pins or anchor.Spring loaded for ease of use.Includes model 3888 80 degree push pin pliers and model 3729 30 degree push pin pliers. KD Tools 41840 2-Pc Push Pin Pliers Kit ...

    Customers Also Shopped For:

    • Spiral Flute Screw Extractor No 1
      Spiral Flute Screw Extractor No 1
      Manufacturers Part #: 21811
      Your Price: $1.64
      b> Spiral Flute Screw Extractor No. 1 To remove 3/32" to 5/32" diameter screw. 1/8" diameter screw extractor shank. .060" diameter screw extractor point. Drill size 5/64". High-quality, for removing broken screws, pipes, bolts and studs. Spiral flute grabs firmly. Heat-treated and tempered tool steel for long life. Drill size permanently stamped on shank. ...
    • Front Pump Seal Installer GM
      Front Pump Seal Installer GM
      Manufacturers Part #: T-0134
      Your Price: $27.95
      Transmission grouping: 180, 180C (3L30) (4L30-E)250, 250-C, 350, 350C325, 325-4L375, 400(3L80), 425, 475 (3L80-HD)POWERGLIDE Weight: 3 lbs. Atec Trans-Tool T-0134 GM Front Pump Seal Installer ...
    • Backpressure Test Adapter Kit
      Backpressure Test Adapter Kit
      Manufacturers Part #: 389
      Your Price: $33.01
      Thexton 389 Backpressure Test Adapter Kit Features: New test kit aids in diagnosing clogged or restricted exhaust systems.Allows comparing backpressure readings ahead and behind of suspected restriction.Ideal for diagnosing clogged catalytic converters, collapsed exhaust pipes, etc. Kit includes small hole punch for use with air hammer, 5/16" X 1/2" self-tapping bolt and test adapter.Use self tapping bolts to plug hole after test is completed. N...
    • Cooling System & Radiator Pressure Cap Tester
      Cooling System & Radiator Pressure Cap Tester
      Manufacturers Part #: 12270
      Your Price: $78.80
      The Stant 12270 tester allows you to test today`s cars higher pressure cooling systems and pressure caps up to 30 pounds.The gauge includes new cap testing pressure ranges of 17-19 lbs., 20 lbs., and 28-30 lbs.The larger color coded dial makes it easy to accurately test these higher pressure caps and systems.The 12270 head also includes a pressure release bar that, when turned clockwise, releases pressure buildup before removing the head from th...
    • 1/2 In Dr Impact Socket, 6 Pt, Deep, 23mm
      1/2 In Dr Impact Socket, 6 Pt, Deep, 23mm
      Manufacturers Part #: 223MD
      Your Price: $6.44
      1/2" Drive Impact Socket, 6 Point, Deep, Size 23mm Forged from the finest Molybdenum alloy steel - the best choice for strength and durability. Designed to extend the life of fasteners. Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener. Lifetime Warranty -- full replacement. ...
    • 1 Inch Drive Impact Socket Extension - 6 Inch L
      1 Inch Drive Impact Socket Extension - 6 Inch L
      Manufacturers Part #: 5300
      Your Price: $30.94
      No doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1" drive impact socket extension is 6" long and is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. It also features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. Forged from the fin...

    Current Reviews: 0