OptiMate 7 12 & 24V Charger/Tester/Maintainer - TecMate

The TecMate TM261V3 OptiMate 7 12 & 24V Charger/Tester/Maintainer is a fully sealed automatic battery charger, tester, and maintainer for 12V and 24V lead-acid starter and deep-cycle batteries, including AGM, GEL, EFB, and STD types. Ampmatic current control technology automatically adjusts charging output between 10A and 1A for 12V batteries (3Ah to 400Ah), or between 5A and 1A for 24V batteries (1Ah to 200Ah). The unit will not initiate charging if the selected voltage does not match the connected battery, and it automatically shuts down if a battery is short-circuited, disconnected, or faulty.

Details

• Features three selectable charge voltage modes for 12V and three for 24V, with memory retention when disconnected from AC power or the battery
• T°-Matic automatic temperature regulation adjusts charge and float voltage by -18mV / °C from a 25°C default
• Initiates recovery for deeply discharged batteries starting from 0.5 Volts
• Weatherproof case with wall mounts measuring 9.25 inches long, 4.88 inches wide, and 2.6 inches high
• Rated for indoor and outdoor use down to -40°F / -40°C
• Equipped with a 6-foot (180 cm) AC supply lead and a 6-foot (180 cm) charge lead with an SAE connector
• Certified to UL, CSA, DOE, and CEC standards
• Includes one charger, a weatherproof battery lead, and a battery clip set for flat, square, or round battery posts