Control Arm Bushing Remover - 1991

The concave design will hold the cutting edge against the bushing.

Old Forge Tools 31991 Control Arm Bushing Remover

Shipping Weight: 1lbs
Manufactured by: Old Forge Tools
Toolsource #: 63312
Manufacturers Part #: 31991
Also Known As: MAY-31991, OF31991

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct

Write Review

$9.11

Frequently bought together:

Air Chisel - Tailpipe Cutoff Tool - 1968

Add this item to your cart and save $2.28 when purchased with the product above.
Discount applied at checkout.

Related Products

Upholstery Clip Remover - 1001

Manufacturers Part #: 31001
Your Price: $7.78
Old Forge Tools 31001 Upholstery Clip Remover Every toolbox needs one of these handy tools, which quickly removes the upholstery clip from the car door. It fits many different sized clips, including the larger ones. The handle is sturdy, fluted plastic and the finish is black oxide.Supersedes p/n 1001...
Add to Cart Details
Brake Adjusting Tool (Import Vehicles) - 1028

Manufacturers Part #: 31028
*this item has been discontinued
Old Forge Tools 31028 Import Vehicle Brake Adjusting Tool Designed for the VW Rabbit, Jetta, Scirocco, Audi, Nissan (Stanza and Sentra), Honda Accord and Prelude with drum brakes which have access holes.The finish is bright luster plate.Supersedes p/n 1028. ...
Air Chisel - Body Ripper - 31955

Manufacturers Part #: 1955
Your Price: $11.60
Body Ripper Tough as its name.Cuts a clean, short radius, virtually eliminating the added work of edging and welding.Has the exclusive Oldforge CURL-CUT.Finished in black oxide with the distinctive quality of the polished shank.Oldforge Pneumatic Tools are made in the US and are warranted for life.For use with a .401 Parker Shank....
Add to Cart Details
Air Chisel - Double Cut Body Ripper Bit - 1956

Manufacturers Part #: 31956
Your Price: $10.20
Double-Cut Body Ripper This tool has twice the life of a single cutting tool because it has two cutting edges on the body. Both cutting surfaces have he exclusive Oldforge CURL-CUT....
Add to Cart Details
Air Chisel Slotted Panel Cutter Bit - 1958

Manufacturers Part #: 31958
Your Price: $13.49
This tool leaves a clean, smooth edge with the cut curling up through the slot in the middle. This tool has the exclusive Oldforge CURL-CUT. Old Forge 1958 Slotted Panel Cutter ...
Add to Cart Details
Air Chisel Sheet Metal Trimmer Bit - 1959

Manufacturers Part #: 31959
Your Price: $11.75
Old Forge Tools 31959 Air Chisel Sheet Metal Trimmer Bit When you need to edge light sheet metal without stretch or distortion, use this sheet metal trimmer and eliminate much of the touch up grinding that is necessary with other trimmers. This tool has the exclusive Oldforge CURL-CUT. NOTE: This is not designed to be a panel cutter....
Add to Cart Details
Air Chisel Spot Weld Breaker Bit - 1960

Manufacturers Part #: 31960
Your Price: $9.90
Spot Weld Breaker Bit The ideal tool for cutting weld spots. It also works very well for cutting molding and rivets....
Add to Cart Details
Air Chisel Radius Cutter Bit - 1961

Manufacturers Part #: 31961
Your Price: $10.58
Radius Cutter Bit This is an exceptional tool because of its ability to cut a tight radius fast and smooth....
Add to Cart Details
Air Chisel Pneumatic Muffler/Tailpipe Remover Bit

Manufacturers Part #: 31965
Your Price: $9.02
Replaces previous part number 1965 Designed to separate telescoped tubing without damage to the inner section. This tool has the exclusive Oldforge CURL-CUT. Old Forge 31965 Muffler and Tailpipe Remover ...
Add to Cart Details

Customers Also Purchased:

Pneumatic Hammer - 6 In

Manufacturers Part #: 31987
Your Price: $22.26
For hammering operations such as u-joints, ball joints and forming body work. It is made longer in length to get into those hard-to-reach areas. The tool is made with 1/2" stock and has a .401 shank. Old Forge Tools 31987 6" Pneumatic Hammer ...
Add to Cart Details
Tie Rod Sleeve Breaker Bit - 1993

Manufacturers Part #: 31993
Your Price: $12.70
The vibration of this tool against the tie rod assembly will break rust and corrosion to permit easy adjustment. Old Forge Tools 1993 Tie Rod Sleeve Breaker ...
Add to Cart Details
Air Chisel - `Outside` Muffler Cutter Bit - 1967

Manufacturers Part #: 31967
Your Price: $14.08
"Outside" Muffler Cutter The concave cutting edge design will fit the outside of the muffler. ...
Add to Cart Details
Air Chisel - Tailpipe Cutoff Tool - 1968

Manufacturers Part #: 31968
Your Price: $12.39
Old Forge Tools 39168 Air Hammer Accessory - Tailpipe Cutoff Tool Features and Benefits: Black oxide finish Use with .401 Parker shank The sharp concave edge on the thin blade will cut off the tailpipe with ease 8-1/4" in length ...
Add to Cart Details
1/2 Inch Taper Punch - 1980

Manufacturers Part #: 31980
Your Price: $7.47
Use for peening and crimping bodies, driving rivets and hinge pins.1/2" Diameter.6" Length.Supersedes p/n 1980 Old Forge Tools 31980 Taper Punch ...
Add to Cart Details
Bushing Splitter Bit

Manufacturers Part #: 91200
Your Price: $11.89
Heavy Duty .401 Parker Shank Tool. For cutting idler arm bushing. Tool Aid 91200 Bushing Splitter Bit ...
Add to Cart Details

Customers Also Shopped For:

Air Hammer Ball Broach Holder/Driver 11/32" - 11mm

Manufacturers Part #: KL5759
*this item has been discontinued
Air Hammer Ball Broach Holder/ Driver Features: Ball Broaches 11/32" - 11mm .401 Parker Shank Replaceable Rubberized Bumber ...
3/8 In Drive Flex Spark Plug Socket Set - 2-Pc

Manufacturers Part #: 4492
Contains: 5/8 In, 13/16 In Flex spark plug sockets.Packaged in a tray.The universal configuration allows you to more easily service spark plugs in hard-to-reach or restricted work areas.SK`s innovative flex socket designs give you the access you need to complete every job with confidence.A durable rubber retainer holds spark plugs by the porcelain insulator for better grip.Made in the USA. SK 4492 2-Pc 3/8 In Drive Flex Spark Plug Socket Set ...
Add to Cart Details
6 Piece Internal & External Circlip Plier Set

Manufacturers Part #: 42116GP
Your Price: $84.92
6 Piece Internal & External Circlip Plier Set 42116GP Circlip Pliers Internal retaining ring 7" and 10" Straight 6-3/4" Angled External retaining rings 7" and 10" Straight 6-3/4" Angled King Tony America 42116GP 6 Piece Internal & External Circlip Plier Set ...
Add to Cart Details
Branch Tube Depth Template 11L and 13L

Manufacturers Part #: ZTSE4876
Your Price: $138.95Includes Free Shipping
This item may not be in stock; please email service@toolsource.com for lead time. For International Trucks Application: 11L and 13L OTC ZTSE4876 Branch Tube Depth Template ...
Add to Cart Details
Replacement Bulb For Model 21000 Circuit Tester

Manufacturers Part #: 21007
Your Price: $0.91
Replacement Bulb For Model 21000 Circuit Tester ...
Add to Cart Details
18 Volt LXT Lithium Ion 3/8" Drive Cordless Impact Wrench Kit

Manufacturers Part #: BTW253
This variable speed, reversible 3/8" drive Makita BTW253 impact wrench is 6-1/8" in length and weighs only 3.3 lbs. Makita Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power). 30-Minute Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, vol...
Add to Cart Details