3/8 In Drive Dial Torque Wrenches
A dial torque wrench shows the torque being applied on a gauge as you pull, so the user can tighten to a set value and also read the torque needed to break a fastener loose. Many in this category have a memory pointer or memory needle that stays at the highest reading. The 3/8 in. drive size covers mid range jobs, with ranges listed in inch pounds, foot pounds and Nm.
Dial wrenches versus click wrenches
A click wrench signals when it reaches a preset value but does not show what happens past that point. A dial wrench shows the reading the whole time, which makes it useful for checking and auditing torque, for slow, steady final tightening, and for reading breakaway torque on a fastener that is already tight. The memory pointer lets the user read the peak value after the pull, even where the dial was hard to see.
Getting good readings
Pick a wrench whose range puts your usual values in the middle of the scale rather than at either end. Pull smoothly at the handle grip, zero the dial before use, and have the wrench checked on a torque tester on a regular schedule.
Auto and engine shops, industrial maintenance, quality control departments and calibration labs use them where torque must be checked and recorded, not just clicked. Brands here include Precision Instruments, CDI, Kent-Moore, K Tool and Proto. Other drive sizes are in the 1/4 in. and 1/2 in. dial torque wrench categories.









.jpeg)







Follow us on social media