What are the different types of wheel weights and when should I use each?

Wheel weights come in several types, primarily clip-on and adhesive. Clip-on weights attach to the wheel flange and are commonly used on steel wheels. Adhesive weights, also known as stick-on weights, adhere to the inside of the wheel and are preferred for alloy wheels to avoid scratching the finish. Some adhesive weights are also coated for corrosion resistance. Consider the wheel material and design when choosing the appropriate weight type.

What weight increments are available, and how do I choose the right one?

Wheel weights are available in small incremental sizes, like 0.25 oz, to larger sizes such as 1 oz and beyond. The appropriate weight depends on the amount of imbalance detected during wheel balancing. Start with a smaller weight and gradually increase until the balancing machine indicates the wheel is properly balanced. Using too much weight can mask other issues, so accurate diagnosis is key. Some weights, like those from WEGMANN automotive, are available in various ounce increments.

Are there different coatings or materials used for wheel weights, and why does it matter?

Wheel weights are commonly made of lead, steel, or zinc, and may have a protective coating. Coatings, like those found on some WEGMANN automotive weights, prevent corrosion and maintain the appearance of the wheel. Lead weights, while effective, are facing increasing environmental restrictions in some areas. Steel and zinc are common alternatives. Always check local regulations regarding the use of lead wheel weights.

How do I properly install clip-on wheel weights to ensure they stay in place?

Proper installation of clip-on weights is crucial for safety and balance. Ensure the clip is the correct type for the wheel flange, as different wheel designs require specific clip profiles. Use a specialized wheel weight hammer or pliers to securely attach the weight to the flange. The clip should grip the flange firmly without damaging the wheel. Always double-check that the weight is seated correctly and won't interfere with brake components.

What's the best way to remove adhesive wheel weights without damaging the wheel's finish?

Removing adhesive wheel weights requires care to avoid scratching or damaging the wheel's finish. Start by gently heating the weight with a heat gun or hair dryer to soften the adhesive. Then, use a plastic scraper or specialized adhesive removal tool to carefully lift the weight. Clean any remaining residue with an adhesive remover safe for painted or coated surfaces. Always test the cleaner in an inconspicuous area first.

Can I reuse wheel weights after they've been removed?

While it might be tempting to reuse wheel weights, it's generally not recommended, especially for adhesive weights. The adhesive on stick-on weights may lose its effectiveness after removal, leading to poor adhesion and potential imbalance. Clip-on weights can be reused if they are undamaged and the clip is still secure, but it's best practice to use new weights for optimal balance and reliability. Damaged weights should always be discarded.

What are 'P style' clip-on weights, and when are they used?

'P style' clip-on weights, like those from Alemite, are designed to fit specific types of steel wheels, often those found on passenger vehicles. The 'P' refers to the shape of the clip that attaches to the wheel flange. It's crucial to match the clip style to the wheel design to ensure a secure fit. Always consult a wheel weight application chart or catalog to determine the correct clip style for a particular wheel.

Do I need special tools or equipment to install or remove wheel weights?

While basic installation and removal can be done with simple hand tools, specialized tools make the job easier and more accurate. A wheel weight hammer or pliers is essential for securely attaching clip-on weights. A plastic scraper and adhesive remover are helpful for removing adhesive weights. Wheel balancing machines are required for accurately determining the amount and location of weight needed. For fulcrum pin assembly, consider 3M Marson tools.

Search

Manufacturers [more]

WEGMANN automotive | MC100N | 1.0 oz. Coated Mag Weight (Box of 25)

Name: 1.0 oz. Coated Mag Weight (Box of 25)
Brand: WEGMANN automotive
SKU: 385679
Price: 12.82 USD
Availability: InStock
Rating: 3 (1 reviews)

larger image

Features and Benefits:

For Alloy Wheels
5-Year Coating
Ounces Only
Fits Many brands like Buick, Chevrolet, Chrysler, Dodge,Ford, Mazda, Oldsmobile, Pontiac & Saturn
Available Sizes 0.25 oz. - 2.50 oz.

Used on most domestic vehicles equipped with alloy rims.The MCFE -Series is the most sold & installed steel serieswheel weight for alloy rims.