Tie Back SRL Device - SL - LE - surewerx

Features and Benefits:

• SELF-RETRACTING DEVICE LE (SRD LE)—CLASS A Single SRL-LE. SRL's that are Leading Edge certified can be used in both overhead and Leading-Edge applications. What is a Leading Edge? - A leading edge can be described as any sharp edge commonly found on a worksite, with which a cable or webbing connection could come into direct contact during a fall. There is considerable force at play during a fall, and a non Leading-Edge SRL (cable or webbing) may cut or snap at a sharp edge during the fall; Leading Edge (LE) self-retracting lifelines are designed to protect the worker when operating near an edge and where a fall hazard exists that could cause the lifeline to come into contact with the edge, for example when working over structural steel or in high-rise concrete buildings under construction with open flooring. An SRL Leading Edge (LE) device is an SRL that has enhanced design features for use in leading edge applications; it provides additional protection against the sharp or abrasive surfaces found on many construction sites and is capable of withstanding a fall over a leading edge.
• 3/4” Webbing, 6ft. working length. LE minimum fall clearance: 13 ft. (4m). Aluminum housing. Unit under 2.5 lbs. in total weight. Maximum total arrest distance: 24 in. (0.61m) non leading-edge application.
• Average arrest force: 765 lbf (3.4kN). Minimum setback distance: 12 in. (0.31 m). Foot level tie-off: Tested and approved for foot level tie-off. Operating temperatures: -22°F to 122°F (-30°C to 50°C).
• Steel snap hook with .75" (19mm) gate opening; different snap hook types available. Double-locking steel carabiner with 3,600 lb. gate strength included for anchor connection.
• Certified to meet OSHA, ANSI Z359.14-2014, Class A, Leading Edge and CSA Z259.2.1 standards.

KnKut Silver & Deming 1/2" Reduced Shank Performance Drills feature a 135 degree split point for fast penetration an