Rear Wheel Slip Plate Set

2" Motion range left/right and forward/backward

• Use the WA1851 Rear Wheel Slip Plate Set to easily make rear camber and toe adjustments on front wheel drive unibody cars and any cars with independent rear wheel suspension.
• The Slip Plates, made of steel, allows the conversion of ramps, benches and racks with recessed flush turntables into four wheel alignment equipment.
• The slip plates allow unrestricted movement of the rear wheels (1" in each direction forward and backward as well as left and right or a total of 2") to make easy accurate adjustments, eliminating the friction between the tires and support system.
• A tube of lubricant, a marine teflon(R), resistant to gasoline, water, salt and solvents, is enclosed with each set.
• They are placed under the rear tires by elevating the rear wheels.
• Overall size: 17-1/4" x 11-1/2" x 3/8"
• Work area: 13-1/4" x 10-1/2"

Wheel-A-Matic WA1851 Rear Wheel Slip Plate Set