Valve Core Tools
Valve core tools remove and install the small spring-loaded cores inside the service valves on vehicle A/C systems and tire valves. This category holds valve core removers and installers, R12 and R134a valve core assortments, high side and low side adapters with valve cores, and replacement valve cores. It also includes valve stems and valve core tools used in tire and TPMS service. Auto A/C technicians, general repair shops, fleet shops and tire shops use them to fix slow leaks at service ports and valve stems.
How a valve core remover works
A simple valve core tool is a small slotted driver that engages the flats on the core and unscrews it. On an A/C system that still holds refrigerant, a remover and installer tool seals onto the service port first. The core is unscrewed and drawn back into the tool body behind a valve, so it can be replaced without losing the charge. The same tool can be used to pull a core before evacuating a system, which speeds up recovery and vacuum time.
Choosing cores and tools
A/C service ports differ between refrigerant types and by high and low side, and some vehicles use their own core sizes, so the core and the tool must match the port. Assortments that cover R12 and R134a cores let a shop handle most common ports from one kit. High side adapters with built-in cores convert or repair a damaged port. For tires, valve cores and stems must suit the valve being serviced; TPMS valve stems have their own cores and parts.
Good practice
Check a suspect core with a leak detector before replacing it, keep new cores clean, and lightly oil the seal where the A/C service procedure calls for it. Recover refrigerant with proper equipment rather than venting it.
We carry valve core tools and parts from Mastercool, FJC, Hamaton, Haltec, CPS and Bartec. Related A/C parts are in A/C Adapters Couplers Fittings and A/C Service Tools.






























































Follow us on social media