Tubing Cutter - Mini

Features:

Cut thin-wall steel, plastic, copper and brass tubing from 1/8 to 5/8" in diameter.

Two rollers provide burr-free cut.

Small size allows cutter to fit into tight areas.

Shipping Weight: 0.2lbs
Manufactured by: GearWrench
Toolsource #: 71115
Manufacturers Part #: 2107
Also Known As: KD2107, KDT-2107, KDT2107

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct

Write Review

List Price: $7.00
You save: $1.84

$5.16

Frequently bought together:

Slotted Screw Starter

Add this item to your cart and save $1.29 when purchased with the product above.
Discount applied at checkout.

Tubing Cutter

Add this item to your cart and save $1.29 when purchased with the product above.
Discount applied at checkout.

Customers Also Purchased:

Tubing Cutter

Manufacturers Part #: 3457
Your Price: $19.79
Features: Cuts tubing, copper, brass, aluminum and thin wall conduit.Has a 1/8" to 1-1/8" capacity and a Reamer Blade to clean off and smooth sharp edges.Both the Cutter Wheel and the Reamer are made of hardened alloy steel. ...
Add to Cart Details
Tubing Bender - Heavy Duty

Manufacturers Part #: 2517
Your Price: $10.20
Features: Bend 3/16, 1/4, 5/16 and 3/8" diameter tubing without kinking.Place tubing in groove and turn the handle to bend.Heavy-duty construction provides years of service. KD Tools 2517 Heavy Duty Tubing Bender ...
Add to Cart Details
Triple Head Tubing Bender - SK 90442

Manufacturers Part #: 368-FH
Your Price: $33.23
Triple Head Tubing Bender For 3/16", 1/4", 5/16" and 3/8" (6 mm and 8 mm) O.D. tubing. 15/16" (17.5 mm) radius to center of tube. Wt. 1.0 lbs.Calibrated markings for making accurate left-hand, right and offset bends.Ninety degree start requires less effort - making bending fast and easy.For soft copper, aluminum and steel.Manufactured for SK Hand Tool by Imperial, SK part number 90442. ...
Add to Cart Details
Slotted Screw Starter

Manufacturers Part #: 2282
Your Price: $9.59
KD Tools 2282 Features: Holds screw securely for use in hard-to-reach areas.Twist the bit to hold screw for easy starting.Strong magnet on opposite end picks up dropped parts.Includes a pocket clip. Length: 5-5/8". KD Tools 2282 Slotted Screw Starter ...
Add to Cart Details
Tubing Bender - Copper & Steel

Manufacturers Part #: 2189
Your Price: $22.16
Features: Bend 3/16, 1/4, 5/16 and 3/8" copper and steel tubing.Tool makes tight bends without the tube collapsing.Roller adapters are included for each tubing size.Place tubing between the adapter and studs and squeeze the handles to bend. KD Tools 2189 Copper & Steel Tubing Bender ...
Add to Cart Details
Combination Flaring Tool - Single, Double, ISO

Manufacturers Part #: 56150
Your Price: $97.01
Combination Flaring Tool Works for Single and Double Flares, Also ISO (Bubble) Flares.This set includes all the adapters and tools necessary for single and double flaring (standard and metric) plus the ISO (bubble) flare. Works on aluminum, copper and soft steel tubing.Not recommended for stainless steel.The set is packed in a plastic molded storage case with complete instructions.Shipping Weight: 3 lb. 8 oz. ...
Add to Cart Details

Customers Also Shopped For:

AccuTorq Users Chart - Color Coded

Manufacturers Part #: 10-0103
Your Price: $1.79
Includes list of AccuTorq products, as well as a long list of vehicles with lug nut size, torque and which AccuTorq should be used on that vehicle.Part number is generic, most recent chart available will be sent.PDF version of this chart is available by clicking the link below. AccuTorq Color Coded Users Chart 10-0103 ...
Add to Cart Details
Replacement Chain for 77175 Hustler Stick

Manufacturers Part #: 77097
Your Price: $57.57
Replacement Chain For 77175 Hustler Stick. ...
Add to Cart Details
The Hustler Pogo Stick

Manufacturers Part #: 77175
Your Price: $136.70Includes Free Shipping
Hustler stick alignment bar for bumpers, panels, hoods, decks and brackets. Indispensable when versatility of a chain hookup is needed. Made with the strength and durability to last! Heavy duty 1-1/4" diameter tubing with two welded hooks for strength and versatility. 1/4" chain, 6' long, hooks on both ends. Made in U.S.A. ALC-Keysco 77175 The Hustler Stick ...
Add to Cart Details
Back Mount Pressure Gauge 2 In 0 - 300 PSI - 1/4 In NPT - Displa

Manufacturers Part #: 1112-300D
Your Price: $9.81
General purpose pressure gauge.2" dial diameter.Pressed steel case w/ shatterproof crystal & brass fitting.Used for air, water, oil, or other fluids which are compatible w/ brass & bronze.Nominal accuracy 3-2-3%.In display pack.Non-stock item. Amflo 1112-300D 2 In Dial 0 - 300 PSI - 1/4 In NPT Back Mount Pressure Gauge ...
Add to Cart Details
7mm, 8mm (5/16 In) 4-Flute Extractor Replacement Finger

Manufacturers Part #: 12314
Your Price: $1.50
Extra Finger for 4-Flute Extractor #10314 The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely. Remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts. Tap Extractors will fit both NC and NF taps. Single Finger only. Walton Tools 12314 5/16" (7mm, 8mm) Replacement Finger ...
Add to Cart Details
1/2 In Dr 12-Pt Standard Impact Socket Set - 14 Pc

Manufacturers Part #: 2678
Your Price: $54.01
Forged from the finest Molybdenum alloy steel - the best choice for strength and durability. Designed to extend the life of fasteners. Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener. Includes heavy molded storage tray. Lifetime Warranty -- full replacement. Sizes Include: 7/16" 1/2" 9/16" 5/8" ...
Add to Cart Details