Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Tire Tools, Wheels & Suspension > Torque Sticks and Charts > 1/2 In Dr 21mm x 150 Lb Tork-Socket - Charco

1/2 In Dr 21mm x 150 Lb Tork-Socket - Charcoal

1/2 In Dr 21mm x 150 Lb Tork-Socket - Charcoal

  • Color: Charcoal
  • Torque Lbs: 150
  • Torque Nm: 200
  • Weight: 1.1 lbs.
  • Lifetime Warranty.
  • Image is representative and may not depict the actual product.

    A:     1.07
    B:     1.23
    C:     1.78
    D:     0.60
    E:     8.69
Grey Pneumatic 28234 1/2" Drive 21mm x 150 Lb Charcoal Tork-Socket

  • Shipping Weight: 1.1lbs
  • Manufactured by: Grey Pneumatic
  • Toolsource #: 106751
  • Manufacturers Part #: 28234
  • Also Known As: GP28234, GRY-28234, GY28234

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct


Related Products

Customers Also Purchased:

Customers Also Shopped For:

  • Truck Transmission Bearing Service Set
    Truck Transmission Bearing Service Set
    Manufacturers Part #: 7070A
    Your Price: $420.61Includes Free Shipping
    The set is designed to help you remove input shaft bearing and countershaft bearings, in both the main and auxiliary boxes of heavy-duty Fuller transmissions.It will also remove end yokes from 1600/1610-1810 series transmissions.The puller delivers 10 tons of mechanical power--essential force for working on big gearboxes.Weight 14 lbs., 3 oz. Applications: Works on Fuller twin-countershaft transmissions: 125, 600, 660, 900, 9500, 1100, 12500, 12...
  • 1/2 Inch Drive Torque Angle Gauge
    1/2 Inch Drive Torque Angle Gauge
    Manufacturers Part #: 3336
    Your Price: $18.08
    KD Tools 3336 Features: Use with a 1/2" drive tool to install various engineering fasteners that require a specified angle application after a pretorque load has been applied.Tool is calibrated in 5? increments with a rotating pointer.1/2" male and female square drive and an adjustable holding rod hold the gauge in position during use.Gauge is packaged in a convenient storage pouch. KD Tools 3336 Torque Angle Gauge ...
  • Cut Thread Fractional Plug Tap - 1/4In -28 NF
    Cut Thread Fractional Plug Tap - 1/4In -28 NF
    Manufacturers Part #: 1423
    Your Price: $2.07
    High carbon steel cut thread fractional tap - 1/4"-28 NF plug tap.Designed and manufactured to handle the most difficult hand tapping applications.Taper, plug and bottoming styles are available.Highly polished flutes - aid in chip removal.Taps produce a class 2B thread.No. of flutes - 4.Made in USA....
  • Retainer - A-046094
    Retainer - A-046094
    Manufacturers Part #: A046094
    Your Price: $11.24
    Chicago Pnuematic Parts A046094 Retainer - A-046094...
  • 2 Ton Double Plunger Low Profile Service Jack
    2 Ton Double Plunger Low Profile Service Jack
    Manufacturers Part #: 200LP
    Your Price: $202.59
    Very low pick up point of 2-3/4". Double plunger. Quick pump.Lifting arm reinforced with internal steel beam. By-pass system. Overload protection.1.9 ton on single stroke under normal load. Extra long 2 piece handle for easier pumping and reach under vehicles.Universal 45 degree guarantees pumping at any position under load.Extra wide nylon wheels (Non-Marking).Reinforced side frames. Foam covered handle. Specifications: Min. Saddle Height ........
  • Slotted Screwdriver Set - 5-Pc
    Slotted Screwdriver Set - 5-Pc
    Manufacturers Part #: 80053
    Your Price: $40.86
    Slotted Screwdriver Set - 5-Pc Set includes 1/8" x 3" with Cabinet Tip, 1/4" x 4" with Hex Bolster, 1/4" x 6" with Hex Bolster, 5/16" x 6" with Hex Bolster, 3/8" x 8" with Hex Bolster.Packaged in a tray.Features dual material handle for comfort and performance.Features Tri-Lobe ergonomic handle to obtain optimal balance of strength and comfort."Speed Zone" at base of handle allows faster turning in low back torque applications.Includes nut bolst...

Current Reviews: 0