Re-threading Tool Set for Wheel Studs (M12x1.25 + M14x1.5) - Gedore

The special re-threading tool enables fast and cost-saving reforming of damaged threads on wheel studs and wheel bolts. In this process, the thread is deformed back to its original geometry by rolling (forming, pressing, coining), without cutting. As a result, the strength of the wheel studs or wheel bolts is fully retained, and the surface is again additionally compacted. Unlike thread cutting, no material is removed in the process. The compact design and the simple drive with a conventional hexagonal socket with reversible ratchet enables the application also directly on the vehicle. Universally applicable on wheel studs and wheel bolts with M12x1.25 and M14x1.5 thread.
o Quick and cost-saving rethreading of damaged threads
o The thread is formed back to its original geometry
o No material is removed in the process
o The strength of the wheel studs or the wheel bolts is completely maintained
o Compact design Code: 3461904 | Part No.: KL-0173-601 A | for Thread: M12x1,25 | M14x1,5 | Drive (hex): 41 mm | Weight: 430 g