What is a tailpipe expander used for, and when would I need one?

Tailpipe expanders are specialized tools designed to enlarge the diameter of exhaust pipes, typically to remove dents, clamp marks, or to ensure a proper fit when connecting exhaust components. They're commonly used after a pipe has been crushed or deformed, preventing a secure seal. For example, if you're installing a new muffler and the existing tailpipe is slightly smaller or has clamp impressions, an expander like those from Lisle or GearWrench can help create a smooth, round surface for a leak-free connection. Using an expander ensures proper alignment and prevents exhaust leaks, improving vehicle performance and reducing emissions.

What are the different types of tailpipe expanders available?

Tailpipe expanders generally come in two main types: manual and hydraulic. Manual expanders, like many Lisle models, rely on hand-turning a threaded shaft to gradually expand the pipe. Hydraulic expanders offer more force for tougher jobs, using a hydraulic pump to drive the expansion. Additionally, there are range extenders that increase the size capacity of existing expanders, allowing them to work on larger diameter pipes. The best choice depends on the frequency of use, the typical pipe sizes you work with, and the amount of force required for the repairs.

How do I select the right size tailpipe expander for my exhaust system?

Selecting the correct size tailpipe expander is crucial for effective and safe use. First, accurately measure the inner diameter (ID) of the pipe you need to expand. Then, choose an expander that covers that size range. For instance, if you need to expand a pipe with an ID of 2 1/4 inches, an expander with a range of 2 3/8 to 3 1/4 inches would be suitable. Avoid using an expander that's too small, as it won't properly enlarge the pipe, or one that's too large, which could over-expand or damage the pipe. Always check the tool's specifications to ensure compatibility.

Can a tailpipe expander be used on any type of exhaust pipe material?

While tailpipe expanders are generally designed for steel exhaust pipes, their suitability depends on the material's thickness and hardness. Thinner or softer materials like aluminum may be more prone to damage or distortion. For stainless steel, which is harder, ensure your expander is robust enough to handle the material without damaging the tool. It's always a good practice to start with light pressure and gradually increase it, carefully monitoring the pipe's reaction. If you're unsure, test the expander on a scrap piece of the same material first.

What safety precautions should I take when using a tailpipe expander?

Safety is paramount when using tailpipe expanders. Always wear safety glasses to protect your eyes from debris. Ensure the expander is properly lubricated to reduce friction and prevent binding. Never exceed the tool's recommended capacity, as this can damage the expander or the exhaust pipe. When expanding, apply even pressure and avoid over-expanding the pipe, which could weaken it. If using a hydraulic expander, be mindful of the pressure and follow the manufacturer's instructions carefully. After expanding, allow the pipe to cool before handling to avoid burns.

How do I prevent damaging the exhaust pipe while using an expander?

To minimize the risk of damage, use a lubricant specifically designed for metalworking on the expander's cones and the inside of the pipe. Apply pressure gradually and evenly, avoiding sudden or excessive force. Regularly inspect the pipe for signs of stress or cracking. If you encounter significant resistance, stop and reassess; the pipe may be too corroded or damaged to expand safely. For heavily damaged pipes, consider cutting out the section and replacing it rather than attempting to force an expansion. Remember to check the pipe's wall thickness to ensure it can withstand the expansion process.

Are there any tricks for expanding exhaust pipes that are particularly difficult or corroded?

For stubborn or corroded pipes, heat can be your friend, but use it cautiously. Applying moderate heat with a torch can make the metal more pliable. Be extremely careful not to overheat the pipe, which can weaken it or create a fire hazard. Penetrating oil can also help loosen corrosion and reduce friction. Apply it liberally and let it soak in before attempting to expand the pipe. If the pipe is severely corroded, it may be best to replace it rather than risk damaging the expander or creating a weak spot in the exhaust system.

What are pipe stretcher range extenders and when are they needed?

Pipe stretcher range extenders are attachments that increase the diameter range of your existing tailpipe expander. For example, Lisle offers range extenders to expand the capacity of their pipe stretchers. These are useful when you occasionally need to work with larger diameter pipes but don't want to invest in a completely separate, larger expander. Before purchasing a range extender, ensure it's compatible with your specific expander model and that it provides the necessary size increase for your application. Always follow the manufacturer's instructions for proper installation and use.

Search

Manufacturers [more]

Lisle | 17510 | Pipe Stretcher Range Extender - 2 3/8 to 2 3/4 In

Name: Pipe Stretcher Range Extender - 2 3/8 to 2 3/4 In
Brand: Lisle
SKU: 89646
Price: 22.13 USD
Availability: InStock
Rating: 3 (1 reviews)

larger image

Pipe Stretcher Range Extender

2 3/8" to 2 3/4" Range

Made from a strong, yet lightweight aluminum alloy.

Other products
Lisle Homepage
Model: 89646
Shipping Weight: 0.5lbs
Manufacturers Part #: 17510
Manufactured by: Lisle
Also Known As: LIS17510, LI17510, LS17510, LIS-17510

Only 1 left in stock - order soon

$22.13

Add to Cart:

Earn 1% Back On Every Purchase (Rewards Program)

We are Here To Help (Contact Us)

Write Review

This product was added to our catalog on Wednesday 21 February, 2007.

Automatic Discount

Special Deal: Purchase the item above and one from below to save!

Old Price:

$19.1300

- $3.06

Your Price:

$16.07

Search

Manufacturers [more]

Categories

Lisle | 17510 | Pipe Stretcher Range Extender - 2 3/8 to 2 3/4 In

$22.13

Automatic Discount

Special Deal: Purchase the item above and one from below to save!

Customers who bought this product also purchased...

Customers Also Shopped For

Customer Service

Popular Manufacturers

Popular Categories