Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Paint & Body > Supplies > Dryaire Membrane Syst

Dryaire Membrane System

Dryaire Membrane System
Advanced air drying technology for shop use. Lightweight, easy-to-install, and simple-to-operate, the Dryaire Membrane System maintains –40°F dew point while achieving 0% compressed air humidity. It removes oil and sub-micron particles down to .01 micron

Features
  • Stage 1 filter provides removal of water and contaminants down to 5 microns
  • Stage 2 coalescer provides removal of oil and sub-microns particles down to .01 microns
  • Stage 3 membrane dryer is maintenance free, no regeneration required
Technical Specs

Part Number Description
6770 Membrane System
Stage 1 Stage 2 Stage 3
Air Inlet, NPT 1/2" 1/2" 1/2"
Air Outlet, NPT 1/2" 1/2" 1/2"
Air Flow Capacity 115 CFM (3.2 m3/min) 70 CFM (2.0 m3/min) 30 CFM (0.85 m3/min)
Max. Operating Pressure 175 psi
(1.2 MPa, 12 bar)
175 psi
(1.2 MPa, 12 bar)
175 psi
(1.2 MPa, 12 bar)
Max. Temperature 150ºF (65ºC) 150ºF (65ºC) 175ºF (79ºC)

Note: For the overnight drain to operate, turn off the air pressure.

Sharpe 6770 Dryaire Membrane System
  • Shipping Weight: 5lbs
  • Manufactured by: Sharpe Manufacturing Co
  • Toolsource #: 120525
  • Manufacturers Part #: 6770
  • Also Known As: SH6770, SHA-6770, SHA6770

Only 1 left in stock - order soon

$1,251.40

Related Products

  • Magnetic Paint Stand for Small Parts
    Magnetic Paint Stand for Small Parts
    Manufacturers Part #: 850
    Your Price: $16.77
    Magnetic Paint Stand for Small Parts. "Painter`s Helper". Secures the small parts on a 12" pedestal with 160 pounds of magnetic force. Firmly holds mirrors, door handles, small trim parts, gas cap doors, steering column parts and motorcycle parts on any metal surface for easy painting. ...
  • Keysco Bumper Stand
    Keysco Bumper Stand
    Manufacturers Part #: 77782
    Your Price: $180.15Includes Free Shipping
    Keysco's bumper stand is quality built at an affordable price!Designed to hold the entire bumper securely.Tubes extend to firmly hold "floppy ends" of plastic bumpers.Adjusts up and down, in and out.Quality built at an affordable price.Made in the USA. Keysco 77782 Bumper Stand ...
  • Keysco Deluxe Bumper Stand
    Keysco Deluxe Bumper Stand
    Manufacturers Part #: 77785
    Your Price: $259.94Includes Free Shipping
    This Deluxe bumper stand comes complete. It includes support tubes, padded hoop and padded u-shaped brackets. This swivels 180-degrees while holding the bumper securely. Also it adjusts up, down, in and out. No worries with this bumper stand! Features: Allows you to work on the outside and inside of any bumper.Tubes extend to firmly hold "floppy ends" of plastic bumpers.Made in the USA. Keysco 77785 Deluxe Bumper Stand ...
  • Metric Nut and Bolt Hardware Kit - 240-Pc
    Metric Nut and Bolt Hardware Kit - 240-Pc
    Manufacturers Part #: W5331
    Your Price: $7.00
    This 240 piece metric nut and bolt kit includes the following sizes: M4 x 20M Bolt-10, M4 x 12M Bolt-10, M4 Washer-20, M4 Nut-20, M5 x 25M Bolt-10, M5 x 16M Bolt-10, M5 Washer-20, M5 Nut-20, M6 x 30M Bolt-10, M6 x 20M Bolt-10, M6 Washer-20, M6 Nut-20, M8 x 40M Bolt-5, M8 x 25M Bolt-5, M8 Washer-10,  M8 Nut-10, M10 x 40M Bolt-5, M10 Washer-10, and  M10 Nut-10. Features: Includes 240 individual pieces All included in a re-sealable Kit co...
  • Large Flat Nose Hook (Fixed Head)
    Large Flat Nose Hook (Fixed Head)
    Manufacturers Part #: 3230
    Your Price: $42.18
    Replacement part for Mo-Clamps 3200 (Sheet Metal Hooks, Set of 4) Alloy heat-treated hooks increase pulling options. May be used with #0810 and #0820 Hole Pull Plates to pull, or use in combination with clamps. Weight: 1 lb (.45 kg) Length: 15" Capacity: 3 tons (2,722 kg) Heat Treated Steel. Made in the U.S.A. Mo-Clamp 3230 Large Flat Nose Hook (Fixed Head) PU3230...
  • Large Round Nose Hook (Fixed Head)
    Large Round Nose Hook (Fixed Head)
    Manufacturers Part #: 3240
    Your Price: $40.97
    Replacement part for Mo-Clamps 3200 (Sheet Metal Hooks, Set of 4) Alloy heat-treated hooks increase pulling options. May be used with #0810 and #0820 Hole Pull Plates to pull, or use in combination with clamps. Weight: 1 lb (.45 kg) Length: 15" Capacity: 3 tons (2,722 kg) Heat Treated Steel. Made in the U.S.A. Mo-Clamp 3240 Large Round Nose Hook (Fixed Head) PU3240...

Customers Also Shopped For:

  • 1/2 In Drive 12 Pt Deep Fractional Socket - 1 In
    1/2 In Drive 12 Pt Deep Fractional Socket - 1 In
    Manufacturers Part #: 40832
    1/2 In Drive 12 Pt Deep Fractional Socket - 1 In Made in the U.S.A., featuring quality workmanship and value. The patented SureGrip(R) hex design drives the side of the fastener, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. High polish SuperKrome(R) plating results in a jewelry-like finish, providing long life and...
  • DryAire Dessicant 3 Stage Filter Air / Air Drying System S
    DryAire Dessicant 3 Stage Filter Air / Air Drying System S
    Manufacturers Part #: 6760
    Your Price: $685.86Includes Free Shipping
    Removes dirt, water, oil, and uncondensed moisture from air lines.100% indicating silica gel provides for maximum moisture absorption.Stage 1 filter includes auto drain & 5 micron filter.Stage 2 coalexcer with auto drain.Stage 3 dessicant dryer - 30 CFM capacity.Approved by most companies` warranty programs.Ideal for moisture sensitive tools. Sharpe 6760 DryAire® 3 Stage Dessicant Dryer System ...
  • Type K Surface Probe FLU80PK-3A
    Type K Surface Probe FLU80PK-3A
    Manufacturers Part #: 80PK-3A
    Your Price: $156.43Includes Free Shipping
    For flat or slightly convex surfaces. Ideal for measurement of hot rollers and plates. Measurement range: 0° to 260° (32° to 500°).Maximum Temperature of Cable: 105° (220°).Maximum Temperature of Handle: 105° (220°).Accuracy: - 2.2° (3.96°) over the range of 0° to 260° (32° to 500°).One year warranty. Fluke 80PK-3A Surface Probe (Type K) ...
  • 3 Ton Floor Jack
    3 Ton Floor Jack
    Manufacturers Part #: HW93652
    Your Price: $387.36
    Made in the USA Heavy duty frame for rugged applications Longer chassis ideal for truck and SUV One piece handle Flanged side plates increase strength Wider for more stability under a load Large front wheels and rear casters for easy maneuvering Cast iron pump base for strength and durability Sealed hydraulic pump for durability Pressure relief valve prevents overloading In-line pump assembly assures long life and no off-center forces for ease i...
  • 18V Compact Lithium-Ion Combo Kit - 3-Pc
    18V Compact Lithium-Ion Combo Kit - 3-Pc
    Manufacturers Part #: LCT300W
    *this item has been discontinued
    New combo kit offers best power-to-weight ratio for both driver-drill and impact driver. Also includes a flashlight.1/2" Driver-Drill delivers 450 in. lbs. of efficient torque in a compact size and weighs only 3.5 lbs.Impact Driver provides 1,280 in. lbs. of maximum torque and weighs only 2.8 lbs.Xenon Rechargeable Flashlight with 4-positon head pivots for greater versatility Includes: BDF452HW 18V Compact Li-Ion 1/2" Driver-DrillBTD142HW 18V C...
  • Combination Radiant & Fan Forced Heater
    Combination Radiant & Fan Forced Heater
    Manufacturers Part #: 198TMC
    Your Price: $94.71
    3-Heat settings: 600 watt radiant900 watt fan forced1500 watt radiant & fan forced Temperature control thermostatDual safety system: Tip over switchManual reset type limit control 6' long - 3 conductorHeight: 15"Depth: 12"1500/900/600 Watts5120 Max BTU's120 Volts1 Phase9 lbs. TPI Corporation 198TMC Combination Radiant & Fan Forced Heater ...

Current Reviews: 0