Steering Wheel Pullers
A steering wheel puller bolts to the threaded holes in a steering wheel hub and uses a center screw against the end of the shaft to pull the wheel off its splines without hammering. This category includes standard and heavy duty steering wheel pullers and a few steering column and steering gear service tools, such as a worm bearing locknut installer.
How a steering wheel puller is used
With the center nut removed, the puller plate is bolted to the hub with bolts that thread into the wheel, and the forcing screw is turned against the shaft until the wheel comes free. Pulling evenly avoids bending the wheel or damaging the column, and it is much safer for the column than striking the wheel. On vehicles with an air bag, the air bag module has to be removed first following the vehicle procedure.
What to look at when choosing
Check that the puller comes with bolts in the thread sizes your vehicles use, and pick a heavy duty puller for trucks and older vehicles with tight wheels. Removing the wheel is the first step for many column jobs, such as replacing a turn signal switch, clock spring, ignition lock or column bearings.
These tools are used by auto repair technicians, restoration shops and DIY mechanics. Ball joint and tie rod tools, strut spring compressors and bearing splitters are in the other Tire Tools, Wheels and Suspension categories. Brands here include OTC, Kent-Moore, Lisle, K Tool and Lang.




























































Follow us on social media