Spot Weld Cutters and Drills
Factory body panels are joined with rows of spot welds. To replace a panel without ruining the part underneath, the technician drills out each weld. This category holds spot weld cutters, double-ended and replacement cutter bits, arbors, spot weld drill bits and cutter sets. Collision repair shops, restoration shops and fabricators use them when removing quarter panels, rocker panels, roof skins and other welded parts.
Cutter or drill bit
A spot weld cutter works like a small hole saw with a center pilot: the pilot sits in a punched center mark and the cutter rings out the weld, leaving a clean hole in the top panel. A spot weld drill bit has a flat-ground point that cuts through the top sheet and stops short of the lower flange, so the flange can be kept for the new panel. Many shops keep both and choose by panel, weld and access.
Getting clean results
Center-punch each weld, run the drill at a moderate speed with steady pressure, and stop as soon as the top layer lets go. Replacement cutter heads keep an arbor in service when the teeth wear, and sets put several cutter sizes in one kit. Related tools are in Drill Bits - Individual, Annular Cutters and Hole Saws.
Brands we carry here include Blair, Dent Fix, H&S Auto Shot, Keysco, S&G Tool Aid and AES.





















































Follow us on social media