Spark Plug Sockets
A spark plug socket is a deep socket sized to a spark plug hex, usually with a rubber insert or other retaining feature that holds the plug and protects the ceramic insulator. This category carries sockets in common sizes such as 5/8 in. and 18 mm, mostly in 3/8 in. drive, in standard and extra long styles for plugs set deep in the cylinder head, plus spark plug wrenches with a built-in handle. Auto repair technicians, engine shops, small engine and marine mechanics and DIY users use them for tune-ups and plug replacement.
Choosing the right socket
Start with the plug hex size, which the plug maker or service information lists, then the reach needed to get down the plug well. Extra long sockets suit engines with deep wells under coil packs. A 6 point socket grips the hex firmly, and a magnet or rubber insert keeps the plug from staying behind in the well when the socket comes out.
Removing and installing plugs
Blow debris out of the plug well before removal so nothing drops into the cylinder. Start new plugs by hand, or with the socket on an extension turned by the fingers, to avoid cross-threading, then tighten to the spec from the plug or vehicle maker. Damaged threads are handled by the tools in Spark Plug Rethreading.
Brands we carry here include NEPROS, SK, Koken, K Tool, CTA and Sunex. Boot removers and gappers are in Spark Plug Boot Removers and Spark Plug Gappers.





















































Follow us on social media