Spark Plug Thread Repair
Spark plug threads in a cylinder head can be damaged by cross-threading, over-tightening, corrosion or a plug blowing out, and aluminum heads are the most prone to it. Repairing the hole in the head saves pulling and replacing the cylinder head. This category holds the tools for both light and heavy damage.
Chasers or repair kits
Light damage, carbon and corrosion can be cleaned up with a thread chaser. It runs through the existing hole and reforms the threads without cutting them oversize. Some chasers cover more than one plug size, and some also fit oxygen sensor bosses. Badly stripped holes need a thread repair kit. The kit taps the hole oversize and installs a threaded insert that brings it back to the original metric plug size. Replacement inserts and taps are carried for kits already in the shop.
Doing the repair
Where possible, work with the piston at top of its stroke and coat the tap with grease so chips stick to it instead of falling into the cylinder. Keep the tap square to the seat, follow the kit maker's steps for seating the insert, and blow out or vacuum the hole before fitting a new plug.
Auto repair technicians, engine shops and small engine shops are the main users. Brands here include Heli-Coil, CTA, Lisle, Steelman, Lang and GearWrench. Spark plug sockets, boot removers and gappers are in the sibling categories.






















































Follow us on social media