What are anti-fatigue mats and where should I use them in my shop?

Anti-fatigue mats are designed to reduce strain and discomfort from standing for extended periods. They provide cushioning and support, improving circulation and reducing stress on joints. In an auto shop, place them in areas where technicians spend a lot of time standing, such as workstations, tool benches, or under lifts. Mats like the Wilmar Performance Tool Diamond Shape Anti-Fatigue Mat offer durable and comfortable surfaces for daily tasks, improving overall shop safety and productivity.

When should I use penetrating oil and what are some best practices?

Penetrating oil is used to loosen corroded or seized fasteners, making them easier to remove without damage. Apply it liberally to the affected area and allow time to soak in, often several hours or overnight for heavily corroded parts. For best results, tap the fastener lightly after applying the oil to help it penetrate. Always wear eye protection and gloves when using penetrating oils like PB Blaster, and avoid using open flames near flammable solvents.

What are driveway signal hoses used for and how do they enhance shop safety?

Driveway signal hoses, like the Milton Industries Deluxe Driveway Signal Hose, are pneumatic tubes that trigger a signal when a vehicle drives over them. They are commonly used to alert shop personnel of arriving customers or vehicles entering the service area. Proper placement of these hoses can prevent accidents by providing an early warning system, especially in busy shop environments. Ensure the hose is securely fastened and clearly visible to avoid tripping hazards.

What is ice melt made of, and how should I use it safely around vehicles and equipment?

Ice melt products are typically composed of various salts, such as sodium chloride, calcium chloride, or magnesium chloride. These compounds lower the freezing point of water, effectively melting ice and snow. When using ice melt around vehicles and equipment, use it sparingly to avoid potential corrosion. Products like Antarctica CMA Ice Melt are formulated to be less corrosive than standard rock salt, but it's still important to rinse affected surfaces with water after application. Always follow the manufacturer's instructions for safe and effective use.

How can I protect vehicle surfaces from damage during repairs or storage?

Protecting vehicle surfaces is crucial to prevent scratches, dents, and other damage during repairs. Use fender covers, seat covers, and floor mats to shield vulnerable areas from tools and debris. For longer-term storage or protection from the elements, consider using self-adhering plastic films like S.M. Arnold Rubble Wrap to seal broken windows or exposed areas. Always clean surfaces before applying protective coverings to avoid trapping dirt or contaminants.

What are the key differences between water-based and solvent-based traffic marking paints?

Water-based traffic marking paints, such as Seymour Stripe Water Based Traffic Marker Paint, offer easier cleanup with water and are generally lower in VOCs (volatile organic compounds), making them more environmentally friendly. Solvent-based paints tend to be more durable and resistant to wear and tear from traffic and weather. Consider the application environment, traffic volume, and environmental regulations when choosing between the two. Always follow local regulations regarding VOC emissions when using solvent-based paints.

How do I choose the right type of ladder or step for my shop?

Selecting the right ladder or step for your shop depends on the height you need to reach and the weight capacity required. Consider a sturdy step stool or a small folding ladder for low-level tasks. For higher reach, opt for an A-frame ladder with a wide base for stability. Ensure the ladder is rated for the weight you'll be carrying, including tools. For added safety and mobility, consider using accessories like Steck Manufacturing Replacement Caster Wheel for Pro Step or Rubber Foot Pad for Pro Step.

Search

Manufacturers [more]

Mace Pepper Gun 2 Pack OC Refill Cartridges

larger image

Features & Benefits:

Easy to reload your Mace Brand Pepper Gun.
20 ft range
UV dye
Made in USA

Mace Pepper Gun 2-Pack OC Refill Cartridges are prefilled, safe and easy to load so you're always prepared and protected. Package includes two 28-gram OC cartridges. 20 Foot Range.

Other products
Homepage
Model: 304615
Shipping Weight: 0.2lbs
Manufacturers Part #: 80421
Also Known As: MAC80421

Special Order
Contact For Details

List Price: $14.99 You save: $2.02
$12.97

Earn 1% Back On Every Purchase (Rewards Program)

We are Here To Help (Contact Us)

Write Review

This product was added to our catalog on Monday 16 March, 2020.

Customer Service

Log In
Contact Us
Shipping Policy
About Us
Privacy Info
Blog

Popular Manufacturers

J.H. Williams
Ernst Manufacturing
Access Tools
Powerpush by Meritool
Kent-Moore
SK Hand Tool
Lisle
Sunex Tools
GearWrench
Old Forge Tools

Search

Manufacturers [more]

Categories

Mace Pepper Gun 2 Pack OC Refill Cartridges

List Price: $14.99 You save: $2.02
$12.97

Customer Service

Popular Manufacturers

Popular Categories

Search

Manufacturers [more]

Categories

Mace Pepper Gun 2 Pack OC Refill Cartridges

List Price: $14.99 You save: $2.02$12.97

Customer Service

Popular Manufacturers

Popular Categories

List Price: $14.99 You save: $2.02
$12.97