DA MICROFIB CUT DISC 5" 2PK - Meguiars

Meguiar's DA Microfiber Cut Disc 5" 2PK (DMC5)

Key Features

• New microfiber disc technology cuts through moderate surface defects with no swirls
• Engineered foam interface for optimal cutting efficiency and controlled conformability
• Optimized for use with DA Correction Compound-D300

Applications

• Use on a dual-action (DA) polisher to remove moderate surface defects, such as swirl marks, scratches, and holograms
• Can also be used on a rotary polisher, but at a lower speed to avoid burning through the paint

Benefits

• The microfiber disc technology provides superior cutting performance without leaving swirl marks
• The engineered foam interface helps to distribute the polishing compound evenly and prevents the disc from loading up
• The DA Correction Compound-D300 is formulated to work synergistically with the DA Microfiber Cut Disc to provide a smooth, swirl-free finish

How to Use

1. Apply a small amount of DA Correction Compound-D300 to the microfiber disc.
2. Attach the disc to the DA polisher and set the speed to 1,500-2,000 RPM.
3. Start by polishing in a small area, working in a circular motion.
4. Gradually increase the pressure as you polish, until the desired results are achieved.
5. Wipe down the surface with a clean microfiber towel to remove any residue.

Warnings

• Do not use on wet or dirty surfaces.
• Do not use on clear coat finishes that are less than 6 months old.
• Do not use on painted surfaces that are not fully cured.

Meguiar's DA Microfiber Cut Disc 5" 2PK (DMC5) is the perfect way to remove moderate surface defects from your vehicle's paint. With its new microfiber disc technology, engineered foam interface, and optimized compound, you can achieve a smooth, swirl-free finish that will last for years.