Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Impact Sockets > 1/2 In Drive > SAE Individual > 1/2" Drive 1-3/8" 6-Point Deep Length Impact Sock

1/2" Drive 1-3/8" 6-Point Deep Length Impact Socket

1/2\" Drive 1-3/8\" 6-Point Deep Length Impact Socket
J7344H - 1/2" Drive 1-3/8" 6-Point Deep Length Impact Socket
Features and Benefits
  • This Deep Length Socket has a socket size of 1-3/8"
  • 3-1/2" length
  • 1/2" Drive size
  • 6 Point
  • Concentric openings
  • Large clearance holes
  • Tight nut end tolerances
  • Made from high alloy steel for greater strength
  • Specially heat treated for the correct balance of strength and durability
Product Details
Weight 1.38 lbs
Bolt Clearance Depth (E) 2-7/8
Drive End Outside Diameter (C) 1-21/32
Drive Type 1/2 In
Nut End Hex Depth (D) 1-13/32
Nut End Outside Diameter (B) 1-7/8
Socket Length (L) 3-1/2
Socket Size 1-3/8
Socket Type 6 POINT
Specifications ANSI Spec.: B107.2

Warranty

  • Use safety goggles, serious eye injury is possible
  • Do not hold socket, universal joint or any other attachment while power is running
  • Do not use damaged socket, replace
  • Do not continue to hammer with an impact tool when the fastener is tight
  • Do not use hand sockets with power tools
  • Do not use power sockets with impact tools
Stanley Proto Industrial Tools PO J7344H - 1/2" Drive 1-3/8" 6-Point Deep Length Impact Socket POJ7344H

  • Shipping Weight: 1.38lbs
  • Manufactured by: Stanley Proto Industrial Tools
  • Toolsource #: 108644
  • Manufacturers Part #: J7344H
  • Also Known As: POJ7344H

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct

$24.32

Related Products


Customers Also Purchased:

Customers Also Shopped For:

  • 3/4 In Dr Impact Socket, 6 Pt, Std, 15/16 In
    3/4 In Dr Impact Socket, 6 Pt, Std, 15/16 In
    Manufacturers Part #: 430
    Your Price: $9.09
    3/4" Drive Impact Socket, 6 Point, Standard, Size 15/16" Forged from the finest Molybdenum alloy steel - the best choice for strength and durability. Designed to extend the life of fasteners. Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener. Lifetime Warranty -- full replacement. ...
  • Manual Hydraulic Service Jack - 4 Ton
    Manual Hydraulic Service Jack - 4 Ton
    Manufacturers Part #: HW93657
    Your Price: $1,931.99
    Dual pump action provides speed to contact the load and power to lift it.Handle adjusts to three pumping positions.Extra long chassis reaches under low overhangs.Large handle knob provides fine load release control."T" handle permits easier maneuvering.Extra strong, solid steel side plates resist twisting.Full swivel rear casters and lifting cap ease positioning.Sealed hydraulic unit keeps out grit, grime and moisture.Automatic valve prevents ove...
  • 1/2 In Dr Socket Holder - Metric
    1/2 In Dr Socket Holder - Metric
    Manufacturers Part #: 1202
    Your Price: $9.69
    No more searching for loose sockets!Organize your sockets for quick, easy identification by size and style.Each post is marked for socket size.Each tray holds both regular and deep sockets.Made of high impact plastic.Made of ABS plastic that resists oil & grease.Made in the U.S. A.Lifetime guarantee. Sockets sold separately. Hansen Global 1202 1/2" Drive Metric Socket Tray - 10-27mm ...
  • Cut Thread Fractional Plug Tap - 5/16In -18 NC
    Cut Thread Fractional Plug Tap - 5/16In -18 NC
    Manufacturers Part #: 1427
    Your Price: $2.59
    High carbon steel cut thread fractional tap - 5/16"-18 NC plug tap.Designed and manufactured to handle the most difficult hand tapping applications.Taper, plug and bottoming styles are available.Highly polished flutes - aid in chip removal.Taps produce a class 2B thread.No. of flutes - 4.Made in USA....
  • Telescoping Gauge Set - 6-Pc Heavy Duty
    Telescoping Gauge Set - 6-Pc Heavy Duty
    Manufacturers Part #: 6554
    Your Price: $64.84
    Self-centering and heavy duty. Set includes: Gage #4349 (5/16"-1/2"). Gage #4350 (1/2"-3/4"). Gage #4351 (3/4"-1-1/4"). Gage #4352 (1-1/4"-2-1/8"). Gage #4353 (2-1/8"-3-1/2"). Gage #4354 (3-1/2"-6"). Checks slots, grooves, recesses, cylinders. Handles are up to 5-1/2" long. Satin chrome finish. Both contacts release or lock by turning knob at end of handle. Central Tools 6554 Imported Telescoping Gauge Set ...
  • 1/2 In Dr 6 Pt Metric Impact Socket - 30mm
    1/2 In Dr 6 Pt Metric Impact Socket - 30mm
    Manufacturers Part #: 230MD
    Your Price: $11.26
    1/2" Drive Impact Socket, 6 Point, Deep, Size 30mm Forged from the finest Molybdenum alloy steel - the best choice for strength and durability. Designed to extend the life of fasteners. Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener. Lifetime Warranty -- full replacement. ...

Current Reviews: 0