Rivets for Auto Body and Fabrication
Rivets join sheet metal, plastic and other materials where a nut and bolt would be bulky or the back side cannot be reached. This category holds rivets in boxes and packs for auto body repair, trim work, truck and trailer body repair and general fabrication. It includes blind pop rivets with mandrels, stainless steel rivets, split rivets, plastic rivets for trim and panels, and self-pierce rivets used in body repair on some newer vehicles. Body shops, collision repair centers, fleet shops, fabricators and home shops use it alongside the riveters in the next category.
How blind rivets work
A blind rivet goes into a drilled hole from one side. The riveter grips the mandrel and pulls it, which collapses the back of the rivet body into a head behind the work and clamps the parts together; the mandrel then snaps off. Split rivets have legs that spread as they are set, and plastic rivets push in or expand to hold trim, liners and shields.
Choosing a rivet
Product names list the rivet diameter and the grip range. The diameter must match the hole and the riveter nose piece. The grip range is the total thickness of material the rivet can clamp, so measure the stack and pick a rivet whose range covers it; one that is too short will not form a proper head and one that is too long will not clamp tightly. Where corrosion matters, match the rivet material to the parts. Self-pierce rivets are set with dedicated tools and should be used only where the vehicle maker's repair procedure calls for them.
Good practice
Drill a clean, round hole of the right size, remove burrs, and hold the riveter square to the work. To remove a rivet, drill out the head with a bit the size of the rivet body. Riveters, riveter parts and rivet nuts are in the neighboring categories.
Brands we carry here include 3M Marson, Auveco, Heli-Coil, Disco, Huck and Dent Fix.
















































.jpeg)




Follow us on social media