What are the most common replacement parts needed for hand riveters?

The parts that wear out most frequently on hand riveters are the jaws (or 'grips') that pull the rivet mandrel, and the nosepieces that match specific rivet diameters. Over time, jaws can become worn or damaged, causing them to slip or fail to grip the mandrel properly. Nosepieces can also wear, crack, or become lost. Keeping spare jaw sets and nosepiece sets, like those from 3M-Marson, on hand will minimize downtime. Also, internal springs can break, though that is less common.

How do I choose the correct nosepiece for my riveter?

Selecting the right nosepiece is crucial for a successful rivet. Nosepieces are sized to match the diameter of the rivet being used. Using the wrong size can result in a bent mandrel, a loose rivet, or damage to the riveter itself. Refer to your riveter's manual or the rivet manufacturer's specifications to determine the correct nosepiece size. Some sets, like the 3M-Marson Mandrel & Nosepiece Set, offer multiple sizes to accommodate a range of rivet diameters. Always ensure the nosepiece is securely attached to the riveter before use.

What should I do if my riveter jaws are slipping or not gripping the rivet mandrel?

Slipping jaws are a common issue, usually indicating wear or contamination. First, try cleaning the jaws with a wire brush and degreaser to remove any debris or lubricant. If cleaning doesn't solve the problem, the jaws are likely worn and need replacement. It's best to replace jaws as a set to ensure even gripping force. Check your riveter model (e.g., a 3M-Marson HP-2) to find compatible replacement jaw sets. Using the riveter with worn jaws can damage the tool or lead to improperly set rivets.

Are riveter parts interchangeable between different brands or models?

Generally, riveter parts are NOT interchangeable between different brands or even different models within the same brand. Each riveter is designed with specific dimensions and tolerances for its components. Attempting to use incompatible parts can damage the riveter or result in unsafe operation. Always refer to the manufacturer's parts list to ensure you are using the correct replacement parts for your specific riveter model. For example, a jaw set designed for a Huck riveter will not fit a Marson riveter.

How often should I replace parts on my riveter?

The replacement frequency for riveter parts depends on usage and the type of materials being riveted. For professional or frequent use, inspect the jaws and nosepieces regularly for wear, cracks, or damage. Replace parts as soon as you notice any signs of deterioration, as this can affect the quality of the rivet and the lifespan of the tool. For occasional use, inspect the parts before each use and replace as needed. Keeping spare parts on hand, like 3M-Marson riveter replacement jaws, minimizes downtime.

What type of maintenance is required for riveters?

Regular maintenance is crucial for extending the life of your riveter. After each use, clean the riveter with a brush to remove debris. Periodically lubricate moving parts, such as the jaws and pivot points, with a light machine oil. Inspect the nosepieces and jaws for wear or damage and replace them as needed. Store the riveter in a clean, dry place to prevent rust and corrosion. Following these simple steps will ensure your riveter remains in good working condition.

How do I determine the correct thread size for a replacement mandrel?

Determining the correct thread size for a replacement mandrel is essential for compatibility. The thread size refers to the diameter and thread pitch of the screw that attaches the mandrel to the riveter. This information is typically found in the riveter's manual or on the original mandrel itself. If you are unsure, you can use a thread gauge or consult the manufacturer's specifications. For example, 3M-Marson offers mandrels with various thread sizes, such as 6-32, so ensure you select the one that matches your riveter.

What are the safety precautions to consider when using riveter parts and tools?

When using riveters and their parts, always wear appropriate personal protective equipment (PPE), including safety glasses to protect your eyes from flying debris. Ensure the riveter is in good working condition and that all parts are properly installed before use. Never exceed the riveter's rated capacity or use it for purposes other than intended. Keep your hands clear of moving parts during operation. If using a pneumatic riveter, follow all safety guidelines for compressed air tools. Replace worn or damaged parts immediately to prevent accidents.

Search

Manufacturers [more]

Astro Pneumatic | PR14-01 | Replacement Nosepiece for PR14, 7334 Riveter

Name: Replacement Nosepiece for PR14, 7334 Riveter
Brand: Astro Pneumatic
SKU: 104102
Price: 11.9 USD
Availability: InStock
Rating: 3 (1 reviews)

larger image

Replacement nosepiece for Astro Pneumatic model PR14 or Mountain model 7334 Riveters.

Astro Pneumatic PR14-01 Replacement Nosepiece

Other products
Astro Pneumatic Homepage
Model: 104102
Manufacturers Part #: PR14-01
Manufactured by: Astro Pneumatic
Also Known As: AOPR14-01, AOPR14-01, ASTPR14-01, AST-PR14-01

We have 21 in stock

Inventory available from other suppliers, prices may be different

$11.90

Add to Cart:

Earn 1% Back On Every Purchase (Rewards Program)

We are Here To Help (Contact Us)

6 people have this item in their cart!

Write Review

This product was added to our catalog on Friday 12 September, 2008.

Automatic Discount

Special Deal: Purchase the item above and the one below to save!

Old Price:

$7.5200

- $1.88

Your Price:

$5.64

Search

Manufacturers [more]

Categories

Astro Pneumatic | PR14-01 | Replacement Nosepiece for PR14, 7334 Riveter

$11.90

Automatic Discount

Special Deal: Purchase the item above and the one below to save!

Customers who bought this product also purchased...

Customers Also Shopped For

Customer Service

Popular Manufacturers

Popular Categories