$HAZ BMPR/CLADDNG COAT ADH PRIMER DK GRA - POLYVANCE

Description:

Adhesion Primer
Container Capacity 1 Quart
Color/Shade Dark Gray
Drying Time 60 Minute at 72 Deg F/15 Minute at 130 Deg F
Application Bumper/Cladding
Overall Dimension 4.2 Inch Diameter x 4.8 Inch Height
Nozzle Size 0.8 to 1.3 Millimeter
Spray Temperature 50 to 90 Deg F
Density 7.3 Pound/Gallon
VOC 6.3 Pound/Gallon
Flash Point 44 F
Specific Gravity 0.924
Applicable Standard ACGIH/CFR/DFG/HMIS/NFPA/NIOSH


Features / Benefits

Sticks to smooth or textured TPO plastics. Ideal for easy refinishing of new, unprimed OEM replacement bumpers from Toyota, Nissan, Kia, Subaru, etc
No sweat! Quit sweating your bumpers in the paint booth
No need to clean, sweat, re-clean, and so on
Sticks to TPO plastic without sanding or scuffing
Just clean the bumper with our 1000 Super Clean plastic cleaner and shoot the Bumper and Cladding Adhesion Primer on
Simple, ready-to-spray, 1K formulation means there’s no waste
What you don’t use, pour back into the can
Compatible with most urethane and polyester-based base-clear topcoat systems
Bumper and Cladding Adhesion Primer does not have to be scuffed or sanded prior to top coating, and it may be top coated at any time after application
A proven labor-saver since its introduction in 2003


UPC:  694687000592
Part Number: 3602-4
UNSPSC: 31211500


Status:  Y