Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Oil Change > Oil Filter Wrench > Adjustable Oil Filter Wrench 2-3/4 to 3-3/4 In

Adjustable Oil Filter Wrench 2-3/4 to 3-3/4 Inch

Adjustable Oil Filter Wrench 2-3/4 to 3-3/4 Inch
KD Tools 2187 Features:
  • With notched link set to 1 of 3 positions, this wrench removes oil filters from 2-3/4 to 3-3/4" (70 to 95mm) in diameter.
  • Wide range of sizes makes this wrench nearly universal.
KD Tools 2187 2-3/4" to 3-3/4" Adjustable Oil Filter Wrench
  • Shipping Weight: 0.65lbs
  • Manufactured by: GearWrench
  • Toolsource #: 71132
  • Manufacturers Part #: 2187
  • Also Known As: KD2187, KDT-2187, KDT2187
$11.16

Frequently bought together:



Customers Also Purchased:

Customers Also Shopped For:

  • Straight Bar Puller Set - 10 Ton
    Straight Bar Puller Set - 10 Ton
    Manufacturers Part #: 4210
    Your Price: $118.41Includes Free Shipping
    Straight Bar Puller Set - 10 Ton Versatile and strong in a plastic carrying case. Set includes:1 - 10" spread3 - spring clips2 - cap screw jaws, 2 15/16" reach2 - double reach wide jaws2 - narrow jaws, 8" reach2 - extra narrow jaws w/ 8" reach (rated at 5 tons)1 - 12" forcing screw1 - 7" short forcing screw ...
  • Carburetor Base Wrench 12 Pt 10mm x 12mm
    Carburetor Base Wrench 12 Pt 10mm x 12mm
    Manufacturers Part #: V392
    Your Price: $17.64
    Designed for removing the carburetor base from all Datsun, Toyota, Mercedes Benz and others. Dual wrench has a 10mm, 12 point box opening on one end and a 12mm, 12 point box opening on the other to fit hexagon nuts. The thin-section design makes it easy for working in close quarters. Wrench is 8-1/4" long with a 2" offset. Made from alloy steel, heat-treated with a chrome finish. Vim Tools V392 Carburetor Base Wrench 10mm x 12mm, 12 Po...
  • Front Hub Puller for 4WD Vehicles
    Front Hub Puller for 4WD Vehicles
    Manufacturers Part #: 7901
    Your Price: $88.32
    Front Hub Puller for 4WD Vehicles Needed to remove the front hub assembly when wheel bearing or brake rotor service is required. Services 3/4- and 1 -ton 4WD pickups with 8-bolt hubs: 1994 and newer Dodge Ram and 1988 and newer Chevrolet and GM. For maxi- mum pulling force, use OTC`s No. 7703 10-lb. slide hammer. Wt., 5 lbs. ...
  • Puller Adapter 5/8-18 Female To 1/4-20 Male
    Puller Adapter 5/8-18 Female To 1/4-20 Male
    Manufacturers Part #: 8000
    Your Price: $13.25
    Male-Female Threaded Adapters For use on the ends of Push- Puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc. Female end 5/8" - 18, Male end 1/4" - 20, Length 2 1/4" ...
  • Bearing Cup Remover
    Bearing Cup Remover
    Manufacturers Part #: 7136
    Your Price: $132.59Includes Free Shipping
    Ideal for servicing hubs on today`s popular front wheel drive small cars.The cone holds the jaws in place during pulling.The 7136 is perfect for pulling internal bearing cups, seals, bushings, etc.Jaw Spread: 15/16" to 3-1/4".Reach, to 3-1/2".Use with any slide hammer having 5/8"-18 thread (OTC 1155 or 1156 or the 927 Push-Puller).Weight: 1lb., 8oz. OTC 7136 Bearing Cup Remover ...
  • Bearing Splitter - 5/8 to 8 In
    Bearing Splitter - 5/8 to 8 In
    Manufacturers Part #: 1126
    Your Price: $233.60Includes Free Shipping
    Bearing Splitter for use w/ OTC Puller Nos. 1047, 1043, and 939. Features "knife-like" edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited.When used w/ an OTC Grip-O-Matic puller, puller jaws grip attachment`s outer edge.When used w/ a Push-Puller, puller legs are threaded into the attachment`s two tapped holes. Max. Spread 8" Min. Spread 5/8" Thread of Tapped Hole in Adapter 1"...

Current Reviews: 0