Dual-Pro Aluminum and Steel Stud System

Features & Benefits:

• Multifunction dent pulling system for aluminum and steel panels
• Two torch cables (one for steel; one for aluminum)
• Timer settings
• Power settings
• Weld studs, tabs, wiggle wire, and shrink tips

Professional multifunction dent pulling system for aluminum and steel panels. Simply select STEEL or ALUMINUM mode and adjust setting for AL studs (4mm or 6mm), pull pins,
pull tabs, wiggle wire, shrink tip or weld-tip. System
features plug-in extended torch cables for ease of
operation, stud, tab, wire and shrink tips, assorted pins,
tabs, wire and rods with weld-tip slide hammer.