1/2 In. Drive Micrometer Torque Wrenches
A micrometer torque wrench, often called a click wrench, is set by turning the handle to a value on a scale marked along the body and around the handle. When the fastener reaches that torque, the wrench gives a click and a slight break you can feel. The 1/2 in. drive is the common size for wheel lug nuts, suspension bolts, larger engine and driveline fasteners and general equipment work.
Using a click wrench
Set the torque, lock the handle if the wrench has a lock, and pull smoothly on the grip until it clicks, then stop. Pulling past the click or jerking the wrench adds torque. Many micrometer wrenches measure in one direction only, so check before using one on left-hand threads. After use, store the wrench at its lowest setting so the spring is not left compressed, and have it checked for accuracy on a regular schedule.
What to compare
Look at the torque range against the jobs you do, the scale units (ft-lb, in-lb or Nm), the head style, such as a fixed square drive or a reversible ratchet head, and handle length. Wrenches that take interchangeable heads are listed under Adapters - Interchangeable Heads and Interchangeable Head.
Brands here include Gedore, KT Pro, GearWrench, CDI, Sunex and OTC. Other drive sizes have their own micrometer wrench categories, and Torque Testers - Certification holds testers for checking accuracy.























































Follow us on social media