Portable Mid-Rise Scissor Lift - ZINKO Hydraulic Jack

This 6000 lb. mid-rise scissor lift is designed to service cars, vans and light-duty trucks. The portable motor trolley is not only a control center for the lift, but also serves as a tow handle to easily move the lift from one bay to another. Ideal for use on wheel and brake related repairs, tire and wheel changing, and collision repair work.

Features:

• Twin hydraulic cylinders and scissor lift design provide maximum support and stability.
• Automatic mechanical safety lock will lift in either 30" or 36 1/4" lift height. Manually operated lever releases lock.
• Hydraulic velocity fuses allow slow release of lift in the unlikely event of hose or hydraulic component damage.
• 3 7/8" low height for easy drive on and off.
• Sliding radius arms easily adjust to vehicle frame lift position.
• Portable trolley supports the pump and maneuvers the lift from one service bay to another.
• Fast and efficient operating pump powered by a 1 hp, 115 V single-phase motor.
• A set of four 2 1/2" riser plates and four swivel rubber lifting pads are included, as well as adapters with extension screw, rubber pads, and steel covered plates for higher frame clearance vehicles.




Specifications

Capacity 3 tons Collapsed Height 3.875 in Extended Height 37 in Min. Height - Pad 5 1/2 in Max. Height - Pad 38 3/4 in Overall Length 83 7/8 in Overall Width 38 3/8 in Ship Weight 770 lbs Horse Power 12 hp Voltage 115 V 230 V Phase Single Frequency 50 Hz 60 Hz Max. Pressure 3200 psi Avg. Flow at Max. Pressure 145 in³/min 0.6 gpm Relief Valve 3600 psi Oil Tank 1 gal Made In Taiwan Color Blue Max Pressure 3600 psi

$85 Standard Freight Fee

Zinko ZTCL-30 Portable Mid-Rise Scissor Lift