Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Lifting Equipment > Lifts > CHLE10-10K 2 Post Li

CHLE10-10K 2 Post Lift

CHLE10-10K 2 Post Lift

E10
The E10 (10,000 lb. capacity) two post lift features Challenger’s innovative
Versymmetric® Technology, providing technicians the versatility to lift vehicles
both symmetrically and asymmetrically within the same service bay. This
exclusive technology facilitates increased efficiency and revenue potential.
With double telescoping screw pads, durable powder coat finish, plated arm
restraints and pins the E10 will accommodate the rigorous demands of a full
service facility. Raise it even higher with optional column height extensions
which will provide an additional 2' overhead clearance. With the economic
choice of the E10 you can afford to grow with its competitive price


Features & Benefits:
• Versymmetric® 3-stage front arms and 2-stage rear arms provide a
wide arm sweep for:
» Asymmetric or Symmetric lifting in the same service bay
» Uni-body design vehicles
» Vehicles with designated outside lift points
» Wider vehicles
» Low profile vehicles
» Both short and long wheelbases
• 11’ 11-7/8” standard height fits in service bay with 12’ ceiling height
• Optional 2’ column height extensions accommodate higher profile
vehicles
• Double Telescoping Screw Pads adjust to multiple heights minimizing
the need for adapters
• Rubber foot pads minimize stress to vehicles with delicate
undercoatings
• Padded overhead shut off system prevents vehicle damage
• Single-point mechanical lock release system allows technician to
disengage both columns simultaneously
• Rubber door guards protect vehicle from door damage
• Premium powder coat finish provides long-lasting durability
• Plated Arm Restraints and Arm Pins inhibit rust and provide
long-lasting durability

**FREE FREIGHT**
Applies to direct shipping points within the 48 continental US. Rural Area Surcharge may apply.

Lift Gate Service $135.00 additional

Direct Ship Only - 2 week lead time from reciept of orders.

  • Manufactured by: Challenger Lifts
  • Toolsource #: 238943
  • Manufacturers Part #: CHLE10
  • Also Known As: CHLE10

Special Order
Contact For Details

$3,373.35

Customers Also Shopped For:

  • 3/8 Inch Drive Computorq3 Electronic Torque Wrench - 10.0-100.0
    3/8 Inch Drive Computorq3 Electronic Torque Wrench - 10.0-100.0
    Manufacturers Part #: 1002CF3
    Your Price: $296.44Includes Free Shipping
    The COMPUTORQ3 Electronic Torque Wrench is a simple to use digital readout wrench that displays real time torque values in any of four torque units, ft-lbs, in.lbs., Nm, kg.cm. Simply set the desired torque value and apply force until the green LED illuminates. Great for light industrial, automotive, motorcycle, watercraft and aircraft applications. Features: Sleek New Design15-Degree Flex Ratcheting HeadPush Button Socket Release HeadLarge, Easy...
  • 10,000 lb. Capacity Versymmetric Inground Cassette Lift
    10,000 lb. Capacity Versymmetric Inground Cassette Lift
    Manufacturers Part #: CS1020WV
    Your Price: $8,418.85
    CS1020WV features the widest drive-thru in the industry (87"), a superior arm sweep and double telescoping screw pads. It is fully contained in a polymer housing to eliminate environmental concerns. Its aesthetically pleasing look creates a showroom style appearance. Specifications: Lifting height: 10,000 lbs.Rise height: 75"Stroke: 68"Width overall: 110";Drive thru clearance: 87"Arm reach minimum: 19-5/8"Arm reach maximum: 42"Rubber pad adapter...
  • 3/8 In Dr Torque and Angle Electronic Torque Wrench 10-100 ft-lb
    3/8 In Dr Torque and Angle Electronic Torque Wrench 10-100 ft-lb
    Manufacturers Part #: 1002TAA
    Your Price: $489.25Includes Free Shipping
    10 - 100 Ft. Lb., 120 - 1200 In. Lb., 12.6 - 135.6 Nm 0-360? Angle Torque Units Specifically designed to meet the needs of the torque professional where torque plus angle is required. If features three units of toruqe, ft-lbs, in.lbs. and Nm as well as the angle mode. The Torque and Angle wrench allows the technician to apply a specific torque load, followed by the angle specification, all in one convenient wrench. It features a three LED light ...
  • 1 Inch Drive 12 Pt Fractional SAE Socket and Drive Tool Set 19 P
    1 Inch Drive 12 Pt Fractional SAE Socket and Drive Tool Set 19 P
    Manufacturers Part #: WSX-21
    Your Price: $1,161.29Includes Free Shipping
    Made in USAAll tools are professional quality, made of high-grade chrome vanadium steel.Sockets feature SUPERTORQUE(R) lobular openings for greater turning power without deforming the fastener. Contents Include: Drive Tools: X-20 20" Sliding T-Handle/Head X-41C 34 3/16" Flex Handle X-51B 20" Ratchet X-110 8" Extension X-115 16" Extension Shallow 12-Point Sockets: X-1248 1 1/2"X-1252 1 5/8"X-1258 1 13/16"X-1260 1 7/8"X-1264 2"X-1270 2 3/16"X-1272...
  • Auto Rotisserie w Hydraulic Jacks
    Auto Rotisserie w Hydraulic Jacks
    Manufacturers Part #: M998128
    Your Price: $2,399.00
    If you agree with the "Work Smarter, Not Harder" philosophy, then you owe it to yourself to look at the "Merrick Originals" Auto Rotisserie with E-Z Spin. Merrick's exclusive "spring-loaded locking pin" system means that a single person can safely rotate a well-balanced and secured vehicle. We've engineered a versatile tool that allows you to securely bring your work to the desired height, then rotate it to the best angle for the task at hand. Sa...
  • Engine Stand Attachment for E-Z Spin Rotisserie
    Engine Stand Attachment for E-Z Spin Rotisserie
    Manufacturers Part #: M998082
    Your Price: $67.95
    The Engine Stand attaches to a Base Stand Assembly to hold virtually any engine out there. The 4 arms are independently adjustable for virtually any bolt hole configurations. Takes advantage of all of the features of the Merrick E-Z Spin system. Rotate your work to the easiest angle. Makes painting engines a breeze! Two Base Stand Assemblies are included in the Auto Rotisserie, but if you do not own an Auto Rotisserie or do not want to break it d...

Current Reviews: 0