Brake Lathes
A brake lathe machines brake rotors and drums to restore a flat, true friction surface and remove runout, scoring and lips. This category includes bench brake lathes, combination lathes for rotors and drums, on the car lathes that cut the rotor while it stays mounted on the hub, and lathe parts such as negative rake toolholders, carbide bits and spindle lock kits.
Bench lathe or on the car lathe
A bench lathe cuts rotors and drums that have been removed from the vehicle, and a combination lathe handles both on one machine. An on the car lathe mounts to the hub or caliper bracket and cuts the rotor in place, so the finished surface runs true to the hub it rides on. That helps where hub runout causes repeat pedal pulsation.
Getting a good cut
Clean the mounting surfaces, use the right adapters so the part is centered, and use a silencer band to stop chatter. Sharp bits and a steady feed give a smooth finish. Measure the rotor or drum before and after the cut and compare it with the minimum or discard size marked on the part; if a cut would take it past that size, replace it instead.
Brake and general repair shops, tire and service centers and fleet shops use these lathes during brake jobs. Brands here include Shark, Coats, Kwik-Way and Ranger. More lathe parts and accessories are in the Brake Lathe Accessories category.
.gif)






























Follow us on social media