Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Diesel & Truck Tools > Injector Test > Caterpillar Fuel Injector Nozzle Pull

Caterpillar Fuel Injector Nozzle Puller

Caterpillar Fuel Injector Nozzle Puller
  • With the 7117, you can pull the pencil nozzles on Caterpillar 1100/3208 diesel engines without damaging them.
  • A specially designed bridge assembly and mechanical forcing screw power do the job quickly. Even when carbon has built up around and behind the carbon seal, the 7117 pulls the nozzles easily.
  • Weight: 1lb., 13oz.
OTC 7117 Caterpillar Fuel Injector Nozzle Puller
  • Shipping Weight: 2lbs
  • Manufactured by: OTC Tools and Equipment
  • Toolsource #: 61873
  • Manufacturers Part #: 7117
  • Also Known As: OT7117, OTC-7117, OTC7117
$151.28

Frequently bought together:


Related Products

  • Front Hub Puller for 4WD Vehicles
    Front Hub Puller for 4WD Vehicles
    Manufacturers Part #: 7901
    Your Price: $88.32
    Front Hub Puller for 4WD Vehicles Needed to remove the front hub assembly when wheel bearing or brake rotor service is required. Services 3/4- and 1 -ton 4WD pickups with 8-bolt hubs: 1994 and newer Dodge Ram and 1988 and newer Chevrolet and GM. For maxi- mum pulling force, use OTC`s No. 7703 10-lb. slide hammer. Wt., 5 lbs. ...
  • Crankshaft Balancer Puller Adapter Set for GM
    Crankshaft Balancer Puller Adapter Set for GM
    Manufacturers Part #: 7911
    Your Price: $44.51
    Crankshaft Balancer Puller Adapter Set for GM Includes shulder bolts and spacer adapter. Wt., 8 oz. ...
  • Crankshaft Balancer Puller Kit for GM
    Crankshaft Balancer Puller Kit for GM
    Manufacturers Part #: 7912
    Your Price: $97.45
    Everything you need to pull harmonic balancers with three tapped holes.The shoulder bolts are designed to prevent them from being installed too deply, protecting the crank sensor and/or interrupter rings from damage.The spacer adapter gives the puller`s forcing screw something to push against.The kit works on 1990 and newer 3300 and 3800 V-6 engines.Includes No. 518 Flange-type Puller and No. 7911 Adapter Set.The 7911 Adapter Set consists of the...
  • GM Steering Wheel Puller Legs
    GM Steering Wheel Puller Legs
    Manufacturers Part #: 7929A
    Your Price: $19.38
    Legs do the work of three separate Kent-Moore tools: J-42120, J-42578, and J-36541-A.GM eliminated the tapped holes in the steering wheel assembly on late model cars and vans, making these puller legs the only way to remove the wheel without damage. They`re used with OTC steering wheel puller No. 7245 or 7403 to get behind the steering wheel assembly to give a straight, even pull. Works on: Pontiac: 1988-93 Lemans; 1997-current Grand Prix, Tran...
  • Ford Vacuum Front Hub Release Tool Set w/ Puller
    Ford Vacuum Front Hub Release Tool Set w/ Puller
    Manufacturers Part #: 7932
    Your Price: $90.34
    Ford Vacuum Front Hub Release Tool Set For CV joint, ball joint, and wheel bearing sensor service, the only way to remove Ford`s new vacuum hub without breaking it is with this tool set. Hubs are plastic, standard removal tools simply will not pull them without damage. Removal clips slip into the slots on the hub to release the connection, puller contains the clips and hub for removal. Designed for 1998 and newer 4X4s with vacuum front hubs: Ra...
  • 8-Way Slide Hammer Puller Set
    8-Way Slide Hammer Puller Set
    Manufacturers Part #: 7947
    Your Price: $149.68Includes Free Shipping
    You can pull flange-type rear axles, stubborn oil seals and bearings and other press-fit parts. Jaws can be set up for 2/3 way internal or external pulling jobs. Includes: Slide hammer with 5 lb. hammer, rear axle pulling attachment, 3-way cross-head, cone, 2-way cross-block, puller hook attachment, pulling jaws (3) for internal or external pulling jobs, grip wrench adapter with single lead (wrench not included) and a dent puller attachment.Also ...
  • 10-Way Slide Hammer Puller Set
    10-Way Slide Hammer Puller Set
    Manufacturers Part #: 7948
    Your Price: $264.69Includes Free Shipping
    You can pull flange-type rear axles, stubborn oil seals and bearings and other press-fit parts. Jaws can be set up for 2/3 way internal or external pulling jobs. Includes: No. 1155 - Slide hammer w/5 lb. hammerNo. 7372 - Rear axle pulling attachmentNo. 24544 - 3-way cross headNo. 24545 - ConeNo. 27241 - 2-way cross blockNo. 27315 - Puller hook attachmentNo. 34698 - Pulling jaws (3) for internal or external pulling jobsNo. 205378 - Grip wrench ada...
  • Puller Adapter 5/8-18 Female To 1/4-20 Male
    Puller Adapter 5/8-18 Female To 1/4-20 Male
    Manufacturers Part #: 8000
    Your Price: $13.25
    Male-Female Threaded Adapters For use on the ends of Push- Puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc. Female end 5/8" - 18, Male end 1/4" - 20, Length 2 1/4" ...
  • Puller Adapter 5/8-18 Female To 5/16-18 Male
    Puller Adapter 5/8-18 Female To 5/16-18 Male
    Manufacturers Part #: 8001
    Your Price: $12.75
    Male-Female Threaded Adapters For use on the ends of Push- Puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc.Female end 5/8" - 18, Male end 5/16" - 18, Length 2 1/4" ...

Customers Also Purchased:

Customers Also Shopped For:

  • Cummins Diesel Fuel Injector Remover Kit
    Cummins Diesel Fuel Injector Remover Kit
    Manufacturers Part #: 6069
    Your Price: $40.18
    Kit contains a fuel injector connector tube remover and fuel injector puller.The fuel injector connector tube must be removed before removal of the injector, or both will be damaged.Application: 1998-1/2-2002 Dodge pickups and vans with 5.9L 24-valve Cummins diesel turbo engine. OTC 6069 Cummins Diesel Fuel Injector Remover Kit ...
  • 4 Inch Long Nose Locking Pliers VGP4LN
    4 Inch Long Nose Locking Pliers VGP4LN
    Manufacturers Part #: 4LN
    Your Price: $10.16
    Jaw adjustment 0 - 1 5/8"/0 - 41mm.Wire cutter. The world`s most versatile tool - used for turning, cutting, tightening, clamping & twisting.Meets federal specifications GGG-W-00649. Adjusting screw gives exacting pressure - turn adjusting screw to fit work and squeeze handle with one hand to lock on with tremendous pressure.Stays adjusted for repetitive use. Guarded release helps keep work safe and fast - guarded release trigger quickly unlocks...
  • Duby Wheel Aligning Gage - 46"-74" Range
    Duby Wheel Aligning Gage - 46"-74" Range
    Manufacturers Part #: 61500
    Your Price: $89.27
    Instant and direct "toe-in, toe-out" reading for all vehicles. Inexpensive and easy to use. Simple instructions have metric conversaion scale if required. Operational width range is 46"-74". Application is for Standard cars, trucks and buses. S & G Tool Aid 61500 Duby Wheel Aligning Gage - 46"-74" Range ...
  • Front Hub Puller for 4WD Vehicles
    Front Hub Puller for 4WD Vehicles
    Manufacturers Part #: 7901
    Your Price: $88.32
    Front Hub Puller for 4WD Vehicles Needed to remove the front hub assembly when wheel bearing or brake rotor service is required. Services 3/4- and 1 -ton 4WD pickups with 8-bolt hubs: 1994 and newer Dodge Ram and 1988 and newer Chevrolet and GM. For maxi- mum pulling force, use OTC`s No. 7703 10-lb. slide hammer. Wt., 5 lbs. ...
  • Ford Vacuum Front Hub Release Tool Set w/ Puller
    Ford Vacuum Front Hub Release Tool Set w/ Puller
    Manufacturers Part #: 7932
    Your Price: $90.34
    Ford Vacuum Front Hub Release Tool Set For CV joint, ball joint, and wheel bearing sensor service, the only way to remove Ford`s new vacuum hub without breaking it is with this tool set. Hubs are plastic, standard removal tools simply will not pull them without damage. Removal clips slip into the slots on the hub to release the connection, puller contains the clips and hub for removal. Designed for 1998 and newer 4X4s with vacuum front hubs: Ra...
  • Fuel Injector Nozzle Puller
    Fuel Injector Nozzle Puller
    Manufacturers Part #: 7121
    Your Price: $124.54Includes Free Shipping
    Designed for removing pencil- type fuel injector nozzles from 5.7 liter GM diesel engines, and nozzles in Caterpillar, John Deere, Waukesha, Case, and White Farm Equipment diesels used in construction and agricultural vehicles.The slide hammer action gives an even, straight pull. It prevents damage to the nozzle or fuel line during removal.Weight: 2lbs., 5oz. OTC 7121 Fuel Injector Nozzle Puller ...

Current Reviews: 0