Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Fuel System > Injector Pump Wrenches > HP Fuel Pump Install

HP Fuel Pump Installer

HP Fuel Pump Installer
Applications: High Feature V6 or ECOTEC with SIDI
  • The SIDI high-pressure fuel pump mounts upwards towards the inside of the head, and must be installed with the camshaft drive lobe on its base circle to prevent damage to the fuel pump.
  • The fuel pump MUST be drawn in evenly in less-than-full-turn increments.
  • The fuel pump rod can be damaged if the pump is drawn into position.
  • EN-48896 fits into the fuel pump mounting bore in the head, and provides a positive indication that the camshaft lobe is on base circle.
  • If the camshaft lobe is not properly positioned, the technician will know from EN-48896 that the engine must be turned until the camshaft lobe is properly positioned.
Manufacturer drop ship; please email for cost and lead time.

GM Special Tools EN-48896 HP Fuel Pump Installer
  • Shipping Weight: 1lbs
  • Manufactured by: Kent-Moore
  • Toolsource #: 160476
  • Manufacturers Part #: EN-48896
  • Also Known As: KMEN48896

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct


Customers Also Purchased:

Customers Also Shopped For:

  • GM Injection Pump Adjustable Wrench Set - J-41089
    GM Injection Pump Adjustable Wrench Set - J-41089
    Manufacturers Part #: 6087
    Your Price: $128.73Includes Free Shipping
    Use to loosen or tighten injection pump retaining bolts whenever pump timing adjustment or pump service is required. Services 1996-1999 GM full-size 2- and 4-wheel drive trucks, vans, and Suburbans with 6.5L diesel engine.Two specially bent wrenches are needed, due to the location of the throttle, cruise control, T.V. cable bracket, cooling system crossover pipe and bracket, and the thermostat housing on vans and pickups.Wrenches are 15 mm, 12-p...
  • Kent-Moore EN-48869 Front Crankshaft Seal Install
    Kent-Moore EN-48869 Front Crankshaft Seal Install
    Manufacturers Part #: EN-48869
    Your Price: $111.71Includes Free Shipping
    Kent-Moore EN-48869  Front Crankshaft Seal Install For GM / General Motors. Current SI lists J-35468, but the pilot OD is approximately 3mm too large, and damages the seal. EN-48869 can be used to install the front seal with the engine in-vehicle or out. EN-48869 includes a threaded rod, nut, and thrust bearing to allow service in-vehicle, but is thick enough on the end to allow the seal to be driven into the bore with a dead-blow mallet. O...
  • 1/2" Drive Standard Pear Head Ratchet
    1/2" Drive Standard Pear Head Ratchet
    Manufacturers Part #: J5449
    Your Price: $51.51
    J5449 - 1/2" Drive Standard Pear Head Ratchet Features and Benefits This Standard Length Pear Head Ratchet has a 1/2" drive Length: 10" Unique floating pawl design provides superior strength and long life Unique 24-tooth gear/floating pawl design provides 15° ratcheting angle while maximizing ultimate torque Thin head design for access into tight work areas Reversing lever design for quick, one hand operation Produc...
  • Automotive Kit
    Automotive Kit
    Manufacturers Part #: 49-90-1660
    Your Price: $63.50
    Automotive Kit 49-90-1660 The Milwaukee Advantage This kit is specially designed for automotive clean up work. The kit includes one each of the following: 49-90-0060 10 foot Vinyl Hose, 49-90-0400 15 inch Crevice Tool, 49-90-0740 Utility Nozzle. Hose is 1-/12 inch I.D. with complimentary attachments. Features Kit specially designed for automotive cleanup work 1-1/2 in. I.D. hose and attachments Milwaukee Electric Tool ML 49-90-1660 ...
  • Torx Socket
    Torx Socket
    Manufacturers Part #: DT-48285
    Your Price: $22.32
    The TEHCM control module, valve body and channel plate are going to be attached to the transmission case using E10 external torx-plus bolts. The special shaped head on these 6 bolts allows quick identification of them as the ones that hold this entire assembly to the trans case. This differentiates these bolts from all the other bolts that hold the valve body and channel plate together. The E10 external torx-plus is not a standard socket configu...
  • High Pressure Connector Remover
    High Pressure Connector Remover
    Manufacturers Part #: 9015A
    Your Price: $16.02
    Use this High Pressure Connector Remover during fuel system service procedures on the Cummins 5.9 and 6.7 Liter Diesel Engine in DR Trucks.2003 through Current Current Usage* 2006 (DR) - )Systems (14 - Fuel System, 9 - Engine, 5.9L Diesel) 2007 (DR) - Systems (14 - Fuel System, 9 - Engine, 5.9L Diesel, 9 - Engine, 6.7L Diesel) 2008 (DR) - Systems (14 - Fuel System, 9 - Engine, 5.9L Diesel, 9 - Engine, 6.7L Diesel) 2009 (DH) - Systems (14 - Fuel ...

Current Reviews: 0