3 1/2 in drive Impact Sockets
Very large 3-1/2 in. drive impact sockets in inch and metric sizes for heavy equipment and industrial fasteners.
Similar Categories
3-1/2 In. Drive Impact Sockets
The 3-1/2 in. square drive is one of the largest drive sizes made, used where fasteners are measured in whole inches across. These impact sockets are made for the very large nuts and bolts on mining and earthmoving equipment, heavy construction machines, large presses and other industrial machinery. The range runs through big SAE sizes such as 6-7/16 in., 6-3/4 in. and 9-1/16 in., and metric sizes such as 190mm, 195mm and 200mm.
How they are used
Sockets this size are turned by large impact wrenches, hydraulic torque tools or torque multipliers with a matching 3-1/2 in. drive, or through an adapter from the drive tool. Impact sockets are built to take the repeated hammering of impact tools; chrome hand sockets are not made for that work and should not be used on an impact wrench. Because sockets in this range are heavy, plan for support and lifting when fitting them to the tool and onto the fastener.
Choosing the right socket
Confirm whether the fastener is SAE or metric and measure it across the flats before ordering, since a socket that is even slightly loose can round a large nut. Check the drive size on your tool and the clearance around the fastener, because the outside diameter of a socket this big takes up a lot of room.
Every socket in this category comes from Genius. For other large drive sizes, see the 2 1/2 In Drive, 1 1/2 In Drive and 1 In Drive Impact Sockets categories, and see Impact Adaptors & Extensions for adapters and extensions.










Follow us on social media