2 1/2 In Drive
Very large impact sockets for 2 1/2 in. drive impact wrenches, sold individually in SAE and metric sizes.
Similar Categories
Featured Products - 2 1/2 In Drive
2 1/2 In Drive Impact Sockets
The 2 1/2 in. square drive is one of the largest impact drives, used with heavy hydraulic and pneumatic impact wrenches on very large nuts and bolts. This category is split into two subcategories: SAE Individual, with sizes from about 4 in. to over 7 in., and Metric Individual, with sizes from 100 mm up past 200 mm.
Why impact sockets
Impact sockets are made to take the hammering of an impact tool. They have thicker walls than hand sockets and a finish meant for impact use, so they hold up where a chrome hand socket could crack. At this size, the socket, the drive and the tool all have to match: a 2 1/2 in. drive socket fits only a 2 1/2 in. drive anvil or an adapter made for it.
Choosing and using large sockets
Pick the SAE or metric subcategory by the fastener, and confirm the exact size across the flats before ordering, since a loose fit can round a large nut. Check the socket depth against the stud length and the room around the nut. Sockets this heavy should be lifted and positioned with care, and the tool should be supported so it does not twist free under load.
Mining, oil and gas, heavy equipment and large industrial maintenance crews use these sockets on the biggest flange, frame and machinery fasteners in their shops and on site. All products here are from Genius. The larger 3 1/2 in drive and other drive sizes are in the neighboring Impact Sockets categories.








.jpeg)




Follow us on social media