Drill Bit Sets
A drill bit set puts a range of sizes in one case or index, so the right bit is on hand for every hole and it is easy to see which size is missing. Auto repair technicians, body shops, fabricators, maintenance crews, contractors and home users rely on them for drilling metal, plastic and wood. This category holds sets; single bits are in Drill Bits - Individual and SDS bits for hammer drills are in Drill Bits - SDS.
Types of sets
Jobber length bits are the standard length for general drilling and make up most sets. Reduced shank sets have a smaller shank on larger bits so they fit a 3/8 in. chuck. Left hand drill bits cut while turning counterclockwise, which can catch and back out a broken bolt while drilling it. Combination drill and driver sets for cordless tools add driver bits to a range of drill bits, and index sets keep each size in a marked slot.
Sizes and standards
Sets come in fractional inch, number, letter and metric sizes. Fractional sets cover most general work, while number and letter sizes fill the gaps between fractions and are often used for tap drill sizes and precise holes. Metric sets suit metric fasteners and tapping.
Drilling tips
Center punch the spot so the bit does not wander, start with a smaller pilot bit for larger holes in metal, and use cutting oil when drilling steel. Run large bits slower and small bits faster, keep steady pressure so the bit cuts rather than rubs, and back out often to clear chips in deep holes. A dull bit makes heat instead of chips, so replace or sharpen it. Clamp the work rather than holding it by hand, and put bits back in their slots so the set stays complete.
Brands here include Milwaukee, KnKut, Hanson, Century Drill, Irwin and DeWALT.

























































Follow us on social media