3/4 In. Drive SAE Impact Sockets
The 3/4 in. drive steps up from 1/2 in. for big fasteners: truck and trailer lug nuts, heavy equipment hardware, large suspension bolts and industrial flange and structural bolts. This category holds individual 3/4 in. drive SAE impact sockets in inch sizes, sold one size at a time so you can add the large sizes your work needs or replace a cracked or lost socket. Fleet and diesel shops, heavy equipment and farm mechanics, tire shops and industrial maintenance crews use them with air and cordless impact wrenches.
Impact sockets versus hand sockets
Impact sockets are made to take the hammering blows of an impact wrench, and they usually have a black finish and a hole or groove for a retaining pin and ring. Chrome hand sockets are not made for that kind of load and should be kept on ratchets and breaker bars. Fit the socket to the anvil with the correct pin and ring so it stays on the tool.
6 point, 12 point, standard and deep
Most impact sockets are 6-point, which grips the flats and resists rounding under impact. Some 12-point sockets are listed here too, for 12-point fasteners and tight positions. Standard length sockets keep the wrench close to the work, while deep sockets reach over long studs, such as on wheel and U-bolt hardware. Check the length, point count and size in each product name.
Clean the anvil and socket bore now and then, and replace sockets that show cracks or a worn drive opening.
Related categories
Sets are in 3/4 in Dr. SAE Impact Socket Set, metric sizes are in 3/4 in Dr. Metric Impact Sockets, and hex bit sockets are in 3/4 In Dr. Impact Hex Sockets.
Brands we carry
3/4 in. drive SAE impact sockets here come from Grey Pneumatic, Sunex, Genius, Williams and Proto, with more from K Tool, SK, KT Pro and GearWrench.




















































Follow us on social media