3/4 In Drive Impact Sockets
3/4 in. drive SAE and metric impact sockets, socket sets and hex drivers for heavy duty fasteners on trucks and equipment.
Similar Categories
Featured Products - 3/4 In Drive Impact Sockets
Best Selling Products - 3/4 In Drive Impact Sockets
3/4 In. Drive Impact Sockets
3/4 in. drive impact sockets are sized for large fasteners turned by heavy duty impact wrenches: truck and bus lug nuts, axle and suspension bolts, driveline and equipment hardware. This section covers 3/4 in Dr. SAE Impact Sockets, 3/4 in Dr. Metric Impact Sockets, SAE Impact Socket Sets, Metric Impact Sets and Impact Hex Sockets. Fleet and diesel shops, truck tire shops, heavy equipment and farm mechanics and industrial maintenance crews are the main users.
Choosing the right type
Individual sockets replace a lost size or add the one you use most, while sets give a matched run of sizes in a case or on a rail. Check whether the fastener is SAE or metric before ordering, since close sizes can feel like a fit and still round a nut. Impact hex drivers, including one piece styles, turn large socket head cap screws.
Sizes and styles
Six point sockets grip the flats of a nut and resist rounding under impact, and they are the usual choice for heavy work. Twelve point sockets fit more positions and suit 12 point fasteners. Standard lengths keep the wrench close to the work, deep sockets reach nuts on long studs, and the largest sockets in this drive run past 2 in. Impact sockets have thicker walls than chrome hand sockets so they hold up to repeated blows.
Using them
Match the drive to the anvil on the impact wrench, and use impact rated adapters and extensions between them; drive adapters and extensions are in Impact Adaptors and Extensions nearby. Seat the socket fully on the fastener before triggering the tool, and check the retaining ring or pin that holds the socket on the anvil, since a loose socket wears quickly and can fall off.
Brands we carry here include Grey, Genius, Sunex, Williams, Proto and KT Pro.


































Follow us on social media