1/2 In Drive Torx Impact Sockets, Individual
These are single impact-rated sockets and bit drivers for Torx fasteners, made to run on a 1/2 in. drive air, electric or cordless impact wrench. They are sold one size at a time to replace a worn bit or fill a gap in a set. Auto repair technicians, fleet and diesel shops and industrial maintenance crews use them on seat bolts, brake brackets, suspension parts and engine hardware where Torx fasteners are tight and a hand ratchet is slow.
Internal star, external star and Torx Plus
An internal star impact driver has a star-shaped bit that goes into a Torx head bolt, sized with a T number such as T40 or T55. External Torx sockets fit over the outside of an E-size star head. Torx Plus is a newer profile with flatter lobes, sized with EP numbers, and needs its own sockets; a standard Torx bit can slip in a Torx Plus head. Check the head of the fastener and the size before choosing.
Using them on an impact
Seat the bit fully in the fastener before pulling the trigger, and hold the wrench square to the bolt so the bit does not cam out. Start a stubborn bolt with a few short bursts instead of one long run. Replace drivers whose lobes look rounded, since a worn bit will damage the fastener.
Brands here include Milwaukee, CTA, VIM, Grey Pneumatic, Sunex and Irwin. Complete sets are in Torx Sets, and hex bit drivers are in Hex Bit Drivers under 1/2 In Drive Impact Sockets.




















































Follow us on social media