Lock Plate Tools
On many steering columns, a spring-loaded lock plate sits under the steering wheel and is held by a retaining ring. A lock plate compressor pushes the plate down against spring pressure so the ring can be removed or installed, giving access to the turn signal switch, ignition lock and other column parts. This category includes lock plate compressors and bridges, removal tools, and steering wheel remover and lock plate compressor sets. Auto repair shops, dealership technicians and restoration shops use them when servicing steering columns.
How the job goes
Once the steering wheel is off, the compressor threads onto the column shaft or bridges across the plate. Turning the screw pushes the plate down far enough to free the retaining ring. With the ring out, the plate, canceling cam and spring come off, and the switch and lock parts underneath can be reached. Reassembly is the same in reverse, compressing the plate to seat a new ring.
Choosing a tool
Columns vary, so check that the tool fits the shaft thread and plate on the vehicle you work on. A combination set that pairs a steering wheel remover with a lock plate compressor covers both steps. On columns with an airbag, follow the service information for disabling and removing it first.
Brands here include OTC, Kent-Moore, Lang, Lisle and Mityvac. Steering Wheel Pullers are in their own category under Tire Tools, Wheels and Suspension.
































Follow us on social media