SDS Drill Bits
SDS drill bits have a slotted shank that locks into a rotary hammer chuck and slides back and forth as the hammer strikes, so the bit chips through concrete, brick, block and stone while it turns. This category holds SDS-Plus and SDS-Max hammer drill bits, carbide-tipped and diamond core bits for cutting round holes through masonry, and core bit extensions. Electricians, plumbers, HVAC installers, concrete and construction crews and facility maintenance departments use them for anchors, conduit and pipe runs, and mounting equipment.
SDS-Plus or SDS-Max
The two systems use different shanks and are not interchangeable. SDS-Plus bits fit lighter rotary hammers and cover the smaller holes used for anchors, fasteners and through holes in block and concrete. SDS-Max bits have a larger shank for bigger rotary hammers and handle larger diameter and deeper holes. Check the chuck on your rotary hammer before ordering, and match the bit to it.
Hammer bits and core bits
A hammer bit has a carbide tip and spiral flutes that carry dust out of the hole. Multi-cutter tips, such as four-cutter designs, help the bit drill round and resist binding on rebar. Bit length is given as a working length and an overall length, so pick a bit long enough for the depth of the hole plus clearance. Core bits cut a ring and leave a solid plug, making large holes with less effort than drilling the full diameter. Carbide-tipped core bits run in hammer mode on masonry, while diamond core bits are used with water for cleaner cuts in concrete. Extensions add reach for thick walls.
Using them
Let the hammer do the work rather than pushing hard, pull the bit back now and then to clear dust, and use dust collection or extraction where the job calls for it. Check for buried pipes and wiring before drilling.
Nearly all of the bits here are from Milwaukee, with additional SDS-Plus hammer bits from DeWALT. Standard twist drill bits for metal are in Drill Bits - Individual and Drill Bit Sets, and Hole Saws covers sheet metal and wood holes.
















































Follow us on social media